+ Reply to Thread
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 59

Thread: Spark plugs

  1. #1
    got_boost!'s Avatar
    Join Date
    Jul 2004
    Location
    Places people shouldn't live.
    Posts
    1,426

    Spark plugs

    Here is the info I have on spark plugs for the R32 and R33 with NGK:

    Spark Plugs
    NGK plugs are pre gapped at .8mm if there is no gap number on the end specifying otherwise, eg:

    BCPR6EIX = NGK iridium heatrange 6 gap = .8mm

    BCPR6EIX-11 = NGK iridium heatrange 6 gap = 1.1mm

    BCPR5EIX-11 = as above but heatrange 5 (factory recommended)

    PFR5A-11 = NGK recommended platinum plug for r32 rb engines.


    NOTE: For the r32 and r33 engines if buying NGK you need plugs with part number starting BCP, not BK. They look the same but have a different taper. The heatrange 5 is standard, 6 is colder which may be a good idea for more boost, and the recommended gap is 1.1mm, which should be closed up for more boost, which is why .8 gap has been suggested. Its harder for a spark to jump the gap when theres more pressure in the cylinder.

    You should have either BCPR5EIX or BCPR6EIX plugs if they are NGK.
    -Josh

    1991 Mitsubishi Eclipse GSX
    1990 Skyline GTS-R

  2. #2
    got_boost!'s Avatar
    Join Date
    Jul 2004
    Location
    Places people shouldn't live.
    Posts
    1,426
    When I originally got the info, it was in reference to the RB20, but the plugs are the same across all models, so should be good for them all The only difference that comes up is between the R32, R33, and R34. As listed in the post, the R34 has a different taper than the 33 or 32.
    -Josh

    1991 Mitsubishi Eclipse GSX
    1990 Skyline GTS-R

  3. #3
    got_boost!'s Avatar
    Join Date
    Jul 2004
    Location
    Places people shouldn't live.
    Posts
    1,426
    And on a side note, no one should be thinking of getting the heat range colder. Those are designed for use with a lot of boost, and if you're not running a lot, the plugs will not ever make it up to their propper self cleaning temperature range, and you're going to be replacing your fouled colder range plugs on a very regular basis :P
    -Josh

    1991 Mitsubishi Eclipse GSX
    1990 Skyline GTS-R

  4. #4
    GTRCer TeeDub's Avatar
    Join Date
    Apr 2004
    Posts
    287
    I was recommended and am now running PFR6A-11's in my GTR. I can't remember who recommended them but I got it from this forum.

    EDIT: http://forums.gtrcanada.com/viewtopic.php?t=369

  5. #5
    GTRCer
    Join Date
    Jan 2004
    Location
    Winnipeg, Canada
    Posts
    429
    one step colder per every extra 150hp isn't it?
    '90 Nissan Skyline GTR / RB26
    '91 Toyota Soarer GT-TL / 1JZ / Greddy T78 / MAP-ECU II / 800cc

  6. #6
    GTRCer
    Join Date
    Jan 2004
    Location
    Long Beach, CA
    Posts
    1,021
    For pump gas I would recommend one heat range colder. They will be fine. Most people up the boost anyway.

    PFR6A-11 is a stock GT-R plug.

    For most modified cars - and recommended to me has been heat range 9-10.

    I ran Heat range 8 in Big Bird. Marcs car is running 10's. Nicks car is running 9's.

    The really cool expensive - hand built NGKs are $30 a plug. R7436-9 actually $31.60 each.

  7. #7
    GTRCer
    Join Date
    Jan 2004
    Location
    Okinawa, Japan
    Posts
    335
    I am running 9's as well.

    6 are the stock heat range for RB26. The RB20 may be a 5 stock.
    BNR32 Owner
    Okinawa, Japan

  8. #8
    GTRCer
    Join Date
    Jan 2004
    Location
    Okinawa, Japan
    Posts
    335
    Have you looked here?:
    http://www.ngksparkplugs.ca/
    BNR32 Owner
    Okinawa, Japan

  9. #9
    GTRCer
    Join Date
    Jan 2004
    Location
    Long Beach, CA
    Posts
    1,021
    I am onto 7116-9 and 7116-10's. They are expensive, but a misfire on a hole thats supporting 100 hp is a second in a quarter mile....

  10. #10
    GTRCer
    Join Date
    Mar 2004
    Posts
    9
    so does anyone know the stock# not jut the part# for the irdiums for the rb26det???? im having problems every where i ask - they wont even look it up unless i have the stock #

    :?

+ Reply to Thread
Page 1 of 6 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts