2.8 stroker ??

[britsabroad]

Its been here for about two months now but I have not had time to do anything with it. I have been busy with my other two GTR`s. I bought this car as a track day beater only to be used a back up car for when my main car has problems. As it stand right now I think I might pull the engine out of this and sell it as a rolling project car.

[GTR--J]

Nice car! Minus the spoiler and some spacers I think it looks unique with the wheel colour! When does it arrive?

[britsabroad]

car pics

[doublejceballos]

if it is the car in your profile pick then I want to see more pictures please
lol

[Super_Dude]

86mm bore = 2568
86.5 =2598
87 =2628
87.5 =2659
88 =2689

87.5 leaves you with pretty thin cylinder walls.
Most people avoid 88mm pistons and I don't know if anyone still makes them.

Hope this helps

[britsabroad]

No stroker

It does not have a stroker kit . But nice surprise inside , it has very nice HKS cams and pulleys. Engine has definately been apart and rebuilt , now wondering if it is maybe oversize bore ?? The auction sheet translation did state 2.7l but can you achieve that with only increasing the bore ??

[britsabroad]

Got busy in the shop and didn`t get to it yet . Will post the findings when I get time to squeeze it into the shop and check it.

[christdeyoung]

Stroker or no stroker?

[britsabroad]

stroker

Thanks for that I will go measure today. I figured out to measure the stroke but was not sure wht number i was looking for . Thanks again

[mcfly]

take a plug out, lay a straight edge across the valve covers then put a ruler that fits in the hole onto the piston. Then rotate the crank with a ratchet and measure the stroke.

73.7 is stock, you are going to be looking for 77.7 mm.

[britsabroad]

Anyone have any idea how to confirm if an engine has a 2.8l stroker kit in it ?? Without removing and stripping the engine ?? I have a car that just arrived from Japan and it was claimed to have a 2.8l . Everything else checks out that it has HKS FCon-V, 720cc injectors, N1 turbos, stainless elbows and 4" exhaust . Just need to confirm the engine to see if I wasted my money !!!