Announcement

Collapse
No announcement yet.

Spark Plugs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 92GTSTproject
    replied
    87-88 pulsar plugs same as rb20 but 1 heat range colder gimme a few hours and ill have the number for you i am running them now they are ngk g power runs amazing also running hks exaust fmic and what i assume is a low impul ecu tune on stock boost
    Last edited by 92GTSTproject; 03-21-2012, 06:44 PM.

    Leave a comment:


  • Skym
    replied
    With the mods on your car I wouldn't go above 12psi (roughly the lowest you can go with stock internal wastegate actuator, boost controller) with stock ECU tune to get a fairly safe A/F ratio (it probably will be leaner than it should be at lower rpm's but not excessive) and would recommend you get a ECU retune (Nistune) to solve the lean problem.

    If retune ECU (Nistune) and add bigger fuelpump, adjustable FPR, Z32 MAF, Z32 MAF plug, bigger turbo, metal headgasket you can push to the limit's of stock injectors, but upgrading injectors is better.
    Last edited by Skym; 03-20-2012, 04:35 AM.

    Leave a comment:


  • GTS-James
    replied
    what psi can the stock fuel pump and injectors handle? like can i run 16 or 18 lbs? i dont mind pushing it to its limits

    Leave a comment:


  • danwit
    replied
    At 14psi they should be gapped .8mm.

    Leave a comment:


  • GTS-James
    replied
    ive got that need em now kid moment goin on... ill go get the oem ones napa has em in stock for 14.79$ each haha, should i leave 1.1mm gap or gap to .8?

    Leave a comment:


  • RABBIT
    replied
    just order online then , order a bunch should take well under a week.
    Or go into a crappy tire and get them on special order.

    Leave a comment:


  • GTS-James
    replied
    ya cant find em anywhere... also im thinking my miss might be an ignitor, got new coils (landed today ) gunna throw them in later and pray my miss is gone, should i use the stock plug with stock 1.1mm gap or the autolites i have in it now and regap them to .8? im running a t28ballbearing, intake, exhaust, 14lbs boost and a fmic. will have yellowjackets in as well

    Leave a comment:


  • Daryl @ RightDrive
    replied
    BCPR6ES are what you need.

    Leave a comment:


  • GTS-James
    replied
    tried bcpr6-8, brk6eix, brk6es, xp5503

    Leave a comment:


  • RABBIT
    replied
    Originally posted by GTS-James View Post
    what are all compatible plugs? i mean ive searched the forums and found a few but noone carries them in saint ohn nb, desperatly trying to get some plugs tonight and cant find any suitable plug numbers... what plugs will work for a rb20? (plug numbers)
    Well which ones have you tried but couldn't get ?

    Leave a comment:


  • GTS-James
    started a topic Spark Plugs

    Spark Plugs

    what are all compatible plugs? i mean ive searched the forums and found a few but noone carries them in saint ohn nb, desperatly trying to get some plugs tonight and cant find any suitable plug numbers... what plugs will work for a rb20? (plug numbers)
Working...
X