clutch master/slave

**speed** · 11-21-2011, 11:08 PM

1990 R32 GTR
anyone know if i can fit a 300zx or 240sx slave>>>?
any input let me know

**gtrjon** · 11-22-2011, 04:43 AM

wrong section

**GTRC Admin** · 11-22-2011, 10:45 AM

Things you did wrong:
1) You posted in the wrong forum
2) You did not indicate for which vehicle you are inquiring

Please provide:
1) Relevant information so people can assist you

BUT FIRST...

Please use the search function, this has been asked before!

**Pete-R33** · 11-22-2011, 10:48 AM

if u have a gtst- yes you can use a 240, problem- clutch feed line comes out the side on a 240. On skylines they come out the bottom. therefore you need to bend the line which sometimes can result in kinking.

Originally Posted by speed

anyone know if i can fit a 300zx or 240sx slave>>>?
any input let me know

**speed** · 11-23-2011, 09:53 AM

oops ma bad, havent gone on the site for awhile,
its for a 1990 r32 GTR

**Pete-R33** · 11-23-2011, 11:49 PM

should be fine then, I believe the GTR R32 has a side fed feed line, if so you are golden.!

**speed** · 11-24-2011, 12:14 AM

ok i guess my lines might be kink then?
because i refilled the clutch master with fluid and about 20 mins of driving the fluid had ccome down half way or more
so would theyre be a leak somewhere in the line? thats my main issue right now

**Pete-R33** · 11-24-2011, 12:26 AM

ya sounds like theres a leak for sure! maybe the fittings are leaking, or a crack.

**speed** · 11-24-2011, 12:34 AM

damn yah i might have to start looking for it pretty soon while the weather is still not too bad!
before storage forsure! all the lines are tuck in so i gotta be really be patient lookin for it lol