advice for poncam purcahse please!

**nimblestix** · 08-23-2011, 03:42 PM

Im looking to buy a drop in tomei kit. i dont want anything too crazy, in fact minimal lift would be excellent, i just want something to open up the mid range a little.

i was thinking 260 degree.

What i dont know though as im new to upgraded cams is if i should get type A 260in and 260ex

or if i should get type B 260in and 252ex.

OR there's type R which is 250in and 250ex

Im also upgrading my injectors at the same time to ID725's

For the record im running twin gt2860r -5's, 660 denso's, 280pump, big fmic, stock ignition, stock maf's and a nistune @ 1.2bar. Putting down 400 rwhp (josh's old car)

plans are to upgrade the cams, injectors / fuel components and ignition.
i would like to turn the boost down slightly and still achieve my 400+ rwhp but not positive about turning down the boost yet.

Im looking at doing this work within the next 2 weeks so any and all feedback is much appreciated.

Thanks boys!

**Daryl @ RightDrive** · 08-23-2011, 03:55 PM

For 2860 I'd choose the Type b cams, they are designed to work with mid to larger sized turbos such as you have.
They are drop in with no work needed.
We are a Tomei dealer and can help you get a set if needed.

**cortexx** · 08-24-2011, 08:29 AM

i smell a rightdrive group buy coming on

**nimblestix** · 08-24-2011, 11:02 AM

Lets do a group so we can save a few bucks!

Sent from my GT-I9000M using Tapatalk

**TyrelLee** · 08-24-2011, 02:52 PM

I'm interested in new cams for sure.

**Daryl @ RightDrive** · 08-24-2011, 03:12 PM

sure, if we can get a few people together we can give a discount

**TyrelLee** · 08-24-2011, 03:17 PM

Daryl, quick question, the more people the better discount?

Thanks

**Daryl @ RightDrive** · 08-24-2011, 03:26 PM

of course!

**TyrelLee** · 08-24-2011, 04:01 PM

Okay well count me in as #1. I want the most aggressive poncams suggested without doing valves/springs. Doing an rb26/30 build and I have a haltech e11v2 ecu so can program everything.