Three plugs right where the PS system would be, i have removed the PS system but what about the other two plugs?
Two plugs one is for driving lights but what about the other?
One plug behind the drivers valve cover, i suspect its from the removed heater lines but don't know for sure, can anyone confirm?
One plug attached to the power brakes wires right beside the booster, can't figure it at all??? any ideas
Last edited by R32GT-R; 11-07-2011 at 11:37 PM.
Trust T618Z,Carrillo Rods,CP Pistons,Tomei 280 10.8 lift ProCams, Tomei Spec C Springs, N1 Block, ARP, ATI, ATL, Bosch 044,Sard 800cc,PFC,Z32 etc.......
FS: tomei 2.6 full counter crank, reground/nitrated.
i believe i may have found some of them
pic1 = 2 x AC connectors and 1 PS connector
pic2 = clearance and fog light connectors
pic3 = heater hose connector
pic4 = OEM Boost guage Sensor
Last edited by R32GT-R; 11-08-2011 at 03:25 AM.
Trust T618Z,Carrillo Rods,CP Pistons,Tomei 280 10.8 lift ProCams, Tomei Spec C Springs, N1 Block, ARP, ATI, ATL, Bosch 044,Sard 800cc,PFC,Z32 etc.......
FS: tomei 2.6 full counter crank, reground/nitrated.
I can check my GTR tomorrow if you'd like. Pic 3 and 4 are correct for sure. I dont have anything plugging into my PS pump, I think its all AC related.
i think its for the PS Tank.
cool i am in Kelowna too. trying to do my initial engine break in before the snow flys
Last edited by R32GT-R; 11-10-2011 at 05:08 PM.
Trust T618Z,Carrillo Rods,CP Pistons,Tomei 280 10.8 lift ProCams, Tomei Spec C Springs, N1 Block, ARP, ATI, ATL, Bosch 044,Sard 800cc,PFC,Z32 etc.......
FS: tomei 2.6 full counter crank, reground/nitrated.
Haha thats funny because I just put 500 on my new motor this week to check for any flaws before I head back to work... Well have to have a meet next spring!
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks