rb26 injector dropping resistor unit

[gezed]

Can someone post a picture of where this unit should go and connect to on a r32 gtr? I got the car with it out and im not sure where its suppose to go

Here is the unit im talking about

That diagram gives a general idea of where its suppose to be but im still not sure

[judasentinel]

It bolts into the wall of the strut tower right behind the large main fuse box in the engine bay (driver's side). Looking into the engine bay from the front, it will be to the left. The plug goes into the main harness. The good thing about Skyline harnesses is that usually there is only one connector for each plug, so it wouldnt be too hard to find it. Look around the main fuse box on the main harness and you will see a plug that the resistor box will connect to.

Keep us posted once you find it.

[gezed]

Thanks, ill take a look tonight

[frankiman]

between the main fuse box and the engine, theres a bracket with usually the stock boost selenoid bolted onto it, the resistor box goes directly on the underside of that braket, just underneath the selenoid