Rb26 with high impedance injectors

[fullthrottle]

I bought some injectors online that were labeled as fo rb20/26 but I didnt realize they dont run the same impedance. My motor is in a 240sx and I dont know where the resistor box is. I know I can delete the box to run the injectors but my question is do I have to? Can I just run the high impedance injectors with the resistor box in place. And where might I find the resistor box mounted at on a swapped car? I tried following the injector wires and get lost in the loom.

[rolyaT]

Mine was basically in the same spot as a Gtr when I did mine. Small 3 inch silver rectangle that should come off main harness, not to far from ur injectors

[rolyaT]

And no you can't run high imp injectors with the resistor, that's the whole purpose of the dropping resistor