Governor?

[krystalized_jdm]

So, I bought my r32 gts-t over a year and a half ago. I've finally have enough to take the governor out. But I'm still quite new to cars at age 17.

- Just wondering what exactly I'd need to do to get this damn thing outta my car. I've heard some people telling me I'd need a new ecu, some people told me to mod my ecu, some people brought up a new fuel management system.

If you have done this or know about it, please post. It'd be a HUGE help. My 180 govern is gay, Wanna do something more than 1/4 drags.

Thanks!
-Krystalized

[A18]

HKS Speed limit defenser, or Greddy also makes one. Those are about 110 bucks.

An ECU Retune will get rid of it too.

[krystalized_jdm]

HKS Speed limit defenser, or Greddy also makes one. Those are about 110 bucks.

An ECU Retune will get rid of it too.

Were can I get one of these? And also, is the stock ecu retunable?

[RixR32]

You can do the wire-snip mod (#53?). It will eliminate the limiter but usually causes other wierd problems like with HICAS.

To do it properly, your ECU will need to be "chipped" to get rid of this. There are lots of chips/sockets and aftermarket chipped ECU's on ebay for the RB20 but this would be just a generalized tune. Most of them do the following:

Speed limiter and boost/fuel cuts removed
RPM limit usually raised depending on tuner
Fuel/ignition maps modified, usually for intake/exhaust/FMIC mods and accounting for higher boost.

These chips usually suffice for the above mentioned mods and with boost raised to the factory turbo's limit of about 13 psi.
If you go any further, or want your own tune-ability, you'll hafta get Nistune installed into your ECU to make it "tuneable".

Rick

[krystalized_jdm]

You can do the wire-snip mod (#53?). It will eliminate the limiter but usually causes other wierd problems like with HICAS.

To do it properly, your ECU will need to be "chipped" to get rid of this. There are lots of chips/sockets and aftermarket chipped ECU's on ebay for the RB20

Aight, I've seen alot of chips on ebay. But hell, they're going for 5 bucks? It seems a little odd, maybe I'm wrong? I'm still very very new to vehicle mods. Your help is very much appreciated m8.

[krystalized_jdm]

http://cgi.ebay.com/ebaymotors/280-h...Q5fAccessories

http://cgi.ebay.com/ebaymotors/Nissa...motiveQ5fTools

Something like that maybe? The 2nd one looks alot more legit than the other one. It says its from Nissan america. :3 Haha, Any comments on either?

[quadracer111]

Where are you located in SK?

If you have a hicas delete I would just do the snip wire mod...

I don't think there are any other side effects other than possibly hicas issues.

I would avoid those chips, they are suppose to make your car run like shat. Mostly mixed results though.

[Gregonater]

The speed sensitive steering can be lost from the wire snip if I am correct....not 100% sure though.

[Saskacer]

Do not buy any 'chips' off of eBay. All are garbage.

[krystalized_jdm]

Yeah, Im kinda assuming that. I found a preprogrammed ecu that does exactly what that chip does and its legit. Thanks for all the input guys!