+ Reply to Thread
Results 1 to 9 of 9

Thread: Mazda FC Injectors

  1. #1
    spikeone's Avatar
    Join Date
    Jan 2004
    Location
    Quebec
    Posts
    2,325

    Mazda FC Injectors

    So as most GTS owners, to get more power, I need to change injectors, I have heard that FC injectors fit the GTS, what I am wondering is, if it's a direct fit or if not, how much "effort" is needed to make them fit

    considering the price of FC injectors (even their stock ones are a good upgrade), would be a nice alternate to getting aftermarket ones that cost nearly 5 times as much
    VVVVVVVVVVVVVVVVVVVViper!

  2. #2
    GTRCer
    Join Date
    Feb 2005
    Location
    Beaumont, AB
    Posts
    1,164
    why not just grab gtr injectors and a resistor pack? everybody knows they fit and they dont take any modification. for the price that you can get them for, and the power they support, i'm pretty sure you'll be more than happy with 444cc.
    90 Nissan GTS-t Type M
    Quote Originally Posted by DrMango
    Your past girl friends must have really skewed your idea of what "tight" is.

  3. #3
    spikeone's Avatar
    Join Date
    Jan 2004
    Location
    Quebec
    Posts
    2,325
    considering you can get FC injectors for less then 100$ sometimes for 6.. it's kind of a better option right now then GTR injectors that sell for over 400$
    VVVVVVVVVVVVVVVVVVVViper!

  4. #4
    GTRCer
    Join Date
    Dec 2004
    Posts
    511
    FCs are 550 top feed low iped that should fit fine. The only thing you may run into is cutting a clip off them to make them fit in the fuel rail.

    Where did you find them for $100 for 6?
    If you still have complete control of your car you are not going fast enough!

  5. #5
    GTRCer DrMango's Avatar
    Join Date
    Dec 2004
    Location
    Blackfalds
    Posts
    1,389
    i got my 6gtr injectors for $100

    kyle
    Quote Originally Posted by funkymonkey
    You guys need to set up an RSPCS (Royal Society for the Prevention of Cruelty to Skylines) and take a baseball bat to the heads of owners that bring disrespect to the heritage by being metrosexual knob jockeys behind the steering wheel.

  6. #6
    spikeone's Avatar
    Join Date
    Jan 2004
    Location
    Quebec
    Posts
    2,325
    mostly checking ebay or local scrap yard that have FC's

    6 GTR for 100$ good deal... hehehe

    GTR need resistance tough right?
    VVVVVVVVVVVVVVVVVVVViper!

  7. #7
    GTRCer DrMango's Avatar
    Join Date
    Dec 2004
    Location
    Blackfalds
    Posts
    1,389
    Quote Originally Posted by spikeone
    mostly checking ebay or local scrap yard that have FC's

    6 GTR for 100$ good deal... hehehe

    GTR need resistance tough right?
    yep for $100 brand new :wink:

    kyle
    Quote Originally Posted by funkymonkey
    You guys need to set up an RSPCS (Royal Society for the Prevention of Cruelty to Skylines) and take a baseball bat to the heads of owners that bring disrespect to the heritage by being metrosexual knob jockeys behind the steering wheel.

  8. #8
    GTRCer 2_eclipsed's Avatar
    Join Date
    Nov 2005
    Location
    Toronto
    Posts
    229
    don't rotory's run two 500cc or 600cc injectors and then another 2 800cc or 1000 cc secondary injectors?

  9. #9
    sidewazegtsr's Avatar
    Join Date
    Dec 2005
    Location
    Ontario
    Posts
    2,410
    ^^^^

    No. The NA's have 4 primaries at 440cc's I believe and 2 secondaries at 550cc IIRC. The T2 FC's have all 550's that are top feed, low impedience. The FD's have all 550's as well however they are side feed, high impedience.

    I don't know if the topfeed injector's have the "clip" on them but I know the sidefeed ones do for sure. I was considering using them for my 240 k-t however, I wised up and bought a Skyline .

    I will get all this confirmed from a buddy of mine who's an FC "expert" and post back then.
    RHD DriftinG, DoeS iT GeT AnY BetteR????

    Project GTS-R: 1992 R32 Skyline GTS RB20na-> Turbo
    Mods: A few things .
    Dyno Results> 209.2whp/196FtLb @ 7psi

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts