RB25 oil filter plate

**MattRose** · 09-28-2011, 02:05 PM

Hey guys,

I was wondering if you knew if an RB26 factory oil filter plate fits on an RB25. The one on my parts car is broken and I'd like to get a full RB25 setup going.

Matt

**MattRose** · 09-29-2011, 02:57 PM

Bump, also wondering if anyone knew if an RB26 Rad or power steering pump would work. Basically got in a collision and need rad, powersteering pump, and filter block for spare motor

**MattRose** · 10-02-2011, 08:46 PM

Hey guys, so basically this is what has happened to our RB25. As you can see the filter was snapped out and I need the piece that attaches the filter to the engine:

Let me know if you can help me!

Matt

**MattRose** · 10-05-2011, 01:59 PM

Still looking for this piece! Someone tell mr if it's similar to RB26!

**MattRose** · 10-23-2011, 07:25 PM

Still need this info guys! It's slowing my build down dramatically!

**RWD_GTR** · 10-23-2011, 09:50 PM

if i remember correct an rb25 has that oil cooler attached to it where an rb26 one doesnt. that cooler is useless tho. all nissan blocks share the same bolt pattern for that peice. so anything from rb20-rb30 will work.

rb26 rad will work.

im assuming your rb25 is non hicas? that would be a no on the power steering pump. need a non hicas pump.