Compatible Parts List For GTS-T / TYPE M

[R32GTSTTYPEM]

Hey Hey,Cant some one have a list off all parts compatible (300zx,240sx etc etc) for GTS T TYPE M 90.


Thank you

[sidewazegtsr]

Well I can't list them all but I can tell you what I've used.

Oil Filter - ANY 240sx or 300zx as they are the EXACT same.

Fuel Filter - I used a 300zx one and just had to remove the stock holder bracket in order to make it fit.

02 Sensor - 1990-94 300zx TT driver's side (left side) is a direct replacement.

Brake Pads - 300zx TT for both front and rear.

Rotors - 300zx TT front and rear.

Well thats about it for now but if I can think of, or do anything else soon, I'll be sure to let you know.

[turbo_CRX]

well there is soo many interchangeable parts, alot being in the sticky's up top but heres just a few:

- clutch in the rb20 is same as rb25 and as VG30DE 300zx non turbo
- thermostat same as VG30DE(TT)
RB20- 21200-42L05
'90-96 VG30- 21200-42L00
'90-'96 VG30DETT- 21200-00001
- Brake master cylinder people have used the:
91 Pathfinder 11-2587 (NAPA #)
- rear shocks same as S13(240sx) and GTR
- the front tension rods are same as 300ZX(Z32) and S13
- Almost all of the other suspension bars are the same as 300ZX includingt the energy suspension master bushing kit
- I believe tie rod ends are the same as maxima A32?
- inner an outer (Front&Rear)CV boots same as Z32 non-turbo
- trany front cover oil seal = D22 '00 K24DE
- shifter bushings = S13
- Diff side oil seal = '90-'93 Z32 non-turbo
- diff side bearing = WD21 '90-'93
- drive pinion oil seal = WD21 '88-'90
- Drive pinion bearing = (F&R) Z32 non turbo
- Inner rear CV joint = Z32
- front wheel bearing = Z32
- Temp/Oil/Boost sensor = '90 Z32
- Mag. starter solenoid switch = B14 91 GA16DE MT only
- Power folding mirrors = S13
- Heater core = U12
- Blower fan and motor = P10


Well basically just ask specifically what you need and someone has done it already.

Cheers ... Chris

[R32GTSTTYPEM]

300zx
S13
P10
A32
U12
y32
WD21


which years please????? beginning/end


Thank you 8)

[DSM_skyline]

Try this - (found in the Fast Parts forum section)

http://www.gtrcanada.com/straightsix...GTStparts.html

[turbo_CRX]

Z32 - '90-'96
S13 - '89-'94
P10(primera) - '91
A32(maxima) - '95-'99 ???(not 100% sure)
U12(stanza) - 89-92
WD21 - '88-'90(drive pinion oil seal) '90-'93(diff side bearin)
Y32(Infinity J30/cedric/gloria) - '90-'93 ( i believe)

I am trying to give you the best years, but as for parts I have used I have bought aftermarket suspension parts from places such as Tein, Cusco, JIC, ARC, HKS, BeeR, etc. You really need to list what you need.

[The.Skyline.Shop]

rear shocks same as S13(240sx) and GTR

I am not sure what you are working on but the rear struts are quite different between the gtst and the gtr/gts-4

[dah_hunter]

Rear inner Tie Rods are same as a 300ZX TT
#48521-35A06
Part Number straight from nissan Canada

[R32GTSTTYPEM]

that great, continue posting for more parts

[turbo_CRX]

im really only going on what i have been told, like I said before almost all the parts I buy, whether it be suspension or interior or exterior its aftermarket most of the time made specifically for my car so I dont have to go through the hasses of something not interchanging, please only use my interchangeabilities as only a reference.