If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Basically, putting an engine back together, not the one in the pictures but the only decent pics i could find. If anyone could please tell me where these hoses goto that would be much appreciated.
Number 1 looks to be the one that goes to your Recirc valves, or to your charcoal canaster( connects to the barb that runs behind the cam cover.)
Number 2 is for the breather off your front diferential. theres a hose that is on your front diff cover, it goes to that little loop, nothing connects to the other side, as its just for vent
number 3, heater lines, this is going to the pipe from your heater core.
1 - goes to the bov nipple port thing on the chassis near the battery
2 - goes up to the inlet side of the oem boost solenoid
3 - (if you are pointing to the vac line) this should go from the exit of the boost solenoid into the metal hard line, assumiung it has no loop, hard to tell looking at that. I have never hooked the diff breather up to under the plenum, always with the loop and near the frame rail/wheel well.
4 - I don't have any blocks with that one
5 - looks like the heater hose
Im actually putting my engine into an S14. So i dont have the front diff, and i wont be using the stock recircs etc, so what should i do with those hoses now? lol
Comment