Tweet
hey so i found LED lights for my cluser but i want the same for my stock boost gauge and the other 2 (i dont remember off hand i think they are oil temp and volt gauge). does anyone know where i could pic up a set of these lights that are led and will replace them?
-
(0=0)_____(0=0)
1991 BNR32GTR -
YUP
666DAN on skyline Aus sells them on e-bay. Search neogaugedashleds. Make your order for the dash lights then send him an e-mail explaining you just want the tripod gauge lights for your specific skyline and what color.
I just did all mine and good light with no flickering!
Good luck -
It would be a simple matter of the 12 volt supply wire all the negatives together. led strip Personally I'd get a rotary selector switch and wire the main positive to a fuse then to the incoming and the outputs to each different lighter plug. Be sure to chose components that exceed the highest current draw of the highest current draw light.Flexible LED Strip Lights
You can do the same with momentary switches but they are pricey especially for higher current ones . you can do it to power individual relays but that might get pricey depending on number of lights/relays neededOutdoor LED Lighting
Another simple way is to use a standard light bar control box and wire each output to a different lightComment
Comment