FS: R34 GTR Front Bumper, Lip, V-spec Diffuser

[mwracing]

this is a three piece bumper.

R34 GTR bumper, Lower lip, and very expensive V-spec Front Air Diffuser.



Bumper and lip is fiberglass with gel coat.

Air Diffuser is some sort of HD plastic, dont think its carbon fiber cause it doesnt look like it.

Front bumper and lip must be sold together.

700CDN + shipping

Air Diffuser

600CDN + shipping

[Eber]

Is it possible to fit this to an r32 or does it require the whole conversion kit? IE) hood, fenders.

[lilweiner]

good luck fitting that thing to anything but a R34.... i imagine it would require a hell of alot of patience, and $$$. Both which i dont have. Good price though

[mwracing]

well the front bumper should line up pretty well with stock fenders.. BUT

headlights will be an issue and hood will be aswell. plus the headlights will not fit to stock fenders.

i am building this R34 conversion, and i have special conversion fenders to make every other stock r34 part(hood headlights bumper) bolt on.

Good price though

thanks... sure beats Nissan OEM prices.. front bumper is 720 plus tax and lower lip is 800 plus tax:shock:

and air diffuser is OEM price of :shock:1300 + tax

[Stinky_1]

thats a LOT of bumper!! It looks like I would have to raise my car up to fit that thing on.

I was wondering....... Once you are done your conversion. If someone calls your plates in as driving an illegal import, and they come to get you. Your VIN plate would actually be an R32 plate. So depending on how well you did your conversion they may think you have a real R34 with a 32 tag on it and slipped it past them!

[JDMCURT]

thats a LOT of bumper!! It looks like I would have to raise my car up to fit that thing on.

I was wondering....... Once you are done your conversion. If someone calls your plates in as driving an illegal import, and they come to get you. Your VIN plate would actually be an R32 plate. So depending on how well you did your conversion they may think you have a real R34 with a 32 tag on it and slipped it past them!

Or you can just look at the 15 year old interior that doesnt have an lcd screen and the tail light that are not the same as an R34...

But as stated above this is a great price!

[mwracing]

Or you can just look at the 15 year old interior that doesnt have an lcd screen and the tail light that are not the same as an R34...

But as stated above this is a great price!

one problem... the taillights will be r34. i have a rear cut of an r34 coming in container. So front and rear R34... i have everything but hood and rear bumper here in vancouver already.

just waiting for nissan parts, and rear cut of true r34 gtr to be welded on.

[mwracing]

thats a LOT of bumper!! It looks like I would have to raise my car up to fit that thing on.

And to be honest.. it isnt that low.

i took a measuring tape from the bottom of a stock headlight to the bottom of the lip of an r32...

then measured from the bumper where the headlight rests against to the bottom of the diffuser.. and it is only 1.5-2" difference. looks like 5" from the picture thou!!

[flipridah17]

sweet price indeed.. i wish you can get an E stamp R34 headlights that way when you get a VI it'll just give them a slap on the face.. Good luck with the project and keep us posted..

[mwracing]

i can get e-code r34 headlamps.

they are available from middlehurst nissan in UK