Announcement

Collapse
No announcement yet.

Saved my car from the great scrap heap in the sky(redo of my first car thread)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Originally posted by thumper View Post
    seeing the state of that clutch and flywheel just pisses me off. is that bolt gone gone, or is it rattling around in the bell housing of the trans? some people just don't have the decency to do the job right.
    Its gone gone lol, I'm gonna go to Nissan tomorrow and get one ordered hopefully.
    Started rebuilding my skyline when i was 18
    1992 GTST RB25DET
    http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
    Originally posted by Bravo
    PS My wife just told me I was shitting in your Cheerios!
    I'm sorry,
    Good luck!

    Comment


    • #62
      Small update.
      Got the engine all together on the stand, as well as sprayed the engine bay with a quick coat of paint.







      Also found out that my flywheel was machined a little before i got it, so I'll have to keep my eyes peeled for one for when my RB20 transmission lets go lol (Note, I had the bolts slightly machined :P )

      Ordered a few more odds and ends today as well, being a 2" to 3" 90 coupler for the turbo, and a 2.75" to 3" 90 for the throttle body, and the oil drain for the Brog Warner

      Note April 15th
      Ordered oil feed line an fittings, and all the an fittings needed for the fuel pressure regulator nothing like $100 in AN fittings.
      Ordered 2 12" electric fans.
      Ordered Apexi turbo timer.
      Last edited by Modb; 04-14-2015, 11:40 PM.
      Started rebuilding my skyline when i was 18
      1992 GTST RB25DET
      http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
      Originally posted by Bravo
      PS My wife just told me I was shitting in your Cheerios!
      I'm sorry,
      Good luck!

      Comment


      • #63
        It's been a little while since I last updated this so I'll just post a quick picture


        Last edited by Modb; 08-09-2015, 11:22 PM.
        Started rebuilding my skyline when i was 18
        1992 GTST RB25DET
        http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
        Originally posted by Bravo
        PS My wife just told me I was shitting in your Cheerios!
        I'm sorry,
        Good luck!

        Comment


        • #64
          is it running?

          Comment


          • #65
            Little update:

            Cars been running for the summer, just been trying to iron out some kinks.



            got the car running just in time for a little fundraising car show





            Started rebuilding my skyline when i was 18
            1992 GTST RB25DET
            http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
            Originally posted by Bravo
            PS My wife just told me I was shitting in your Cheerios!
            I'm sorry,
            Good luck!

            Comment


            • #66
              Who did the pipe work?

              Comment


              • #67
                All of the piping was done by a friend of mine, Ben Graham. I was stoked on how nice it looks haha
                Started rebuilding my skyline when i was 18
                1992 GTST RB25DET
                http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
                Originally posted by Bravo
                PS My wife just told me I was shitting in your Cheerios!
                I'm sorry,
                Good luck!

                Comment


                • #68
                  Small update:



                  Picked up some 18" Work VS XX's while in Toronto for Import Fest
                  Last edited by Modb; 08-28-2015, 05:43 PM.
                  Started rebuilding my skyline when i was 18
                  1992 GTST RB25DET
                  http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
                  Originally posted by Bravo
                  PS My wife just told me I was shitting in your Cheerios!
                  I'm sorry,
                  Good luck!

                  Comment


                  • #69
                    Started rebuilding my skyline when i was 18
                    1992 GTST RB25DET
                    http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
                    Originally posted by Bravo
                    PS My wife just told me I was shitting in your Cheerios!
                    I'm sorry,
                    Good luck!

                    Comment


                    • #70
                      EFFF! Car looks awesome! Such a good story.

                      Comment


                      • #71
                        Thanks!! Aha it's been quite a wild run, and i plan on cleaning up a few things next year but i hope to have a year to enjoy the car now.
                        Started rebuilding my skyline when i was 18
                        1992 GTST RB25DET
                        http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
                        Originally posted by Bravo
                        PS My wife just told me I was shitting in your Cheerios!
                        I'm sorry,
                        Good luck!

                        Comment


                        • #72
                          Guess I'll make a 2016 Update, the car for the most part isn't getting much done to it after the big over haul last winter. Main goal for this year is to fix a few issues, one being re-finishing the Work VSXX's I bought in September as the needed to be re-sealed. I'm also doing the LS coil conversion, soon to order Haltech, and fix an exhaust leak at the manifold.
                          I wanted to use gold plated hardware, and have the faces re-powder coated white and they tuned out really good.





                          LS Coil conversion harness from Wiring Specialtys


                          Also could resist and I bought a CF Fujimura Gurney Flap haha
                          Started rebuilding my skyline when i was 18
                          1992 GTST RB25DET
                          http://forums.gtrcanada.com/gts-project-cars/54849-saved-my-car-great-scrap-heap-sky-redo-my-first-car-thread.html
                          Originally posted by Bravo
                          PS My wife just told me I was shitting in your Cheerios!
                          I'm sorry,
                          Good luck!

                          Comment

                          Working...
                          X