Interchangeable parts/Underground upgrades

[SHYUMIDESUGA]

S13's can use...
HCR32 tierod & tierod ends
HCR32 type M front calipers (also need brake line & master cylinder, SR20 only!)
HCR32 rear brakes (take hub, + extension of brake wire support required, SR20 only!)
S14/HCR32 type M Airflow sensor
S14 tension rod & stabalizers, BNR32 (only rear)
Z32 Turbo Transmission mount
BNR32 Shift lever

S13/S14
RB26DETT engine mount (2cm lower)

R32...
S15, R33 & R34 Rear Suspension Arm

ECR33...
RB26DETT stock turbo & exhaust manifold (front pipe & intake too!)

HCR32(RB20)/ECR33(RB25)
RB26DETT throddle body
RB26DETT Crank Pulley (torque)

R32/R33(RB25DE)
Minor mod (1mm) can fit a RB26 head

BNR32
Z32
BCNR33
Fuel pumps interchangeable

BNR32
BNR33 & BNR34 stock turbo
BNR33 & BNR34 Rotor & Caliper

S14
BNR32 Differential to Drive shaft




Tried to concentrate on things needing little to no "manufacturing".

Cheers

[Daryl @ RightDrive]

Yes, the BNR32 will be able use BCNR33/BNR34 rotors and calipers, but there are some mods to be done, it is not a straight swap. It is pretty simple but the parts are hard to find in NA.
I have done the swap on my BNR32 and can help anyone who wants to do it as well.

[Browny_R31]

ohhh geez lets see. All the bits from differant cars on mine... hmmm

s13:

s14 hubs and brakes (also changing the front to 5 stud, then u can also use GTR rotors and calipers on the front)
r33 brake booster
R32 GTR fuel pump

s14:

GTR rotors and calipers front

R31:

Toyota corolla rear brakes (hydraulic lined for a cheap hydro setup)
Pontiac GTO rear brakes
any S13 front suspension part (plus all s13 to s14 and GTR upgrades)
R32 steering rack