If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Lockbar works. But for racetrack use a non HICAS subframe to eliminate balljoints and can upgrade subframe bushes at same time. If you search for drift thread's, should find a S13? non HICAS subframe fits (also R32 has a model without HICAS, so can use that subframe).
If HICAS light on dash is on -
Low fluid level in powersteering resouvoir (common problem, especially if powersteering hoses in engine bay are leaking due to using factory clamps. Solution is to change to worm drive type clamps and drain, refill with new powersteering fluid)
Alternator problem (low? voltage)
Sensor or wiring problem
Not using a HICAS compatible boss kit (non compatible boss kit interfers with steering angle sensor for HICAS that's behind steering wheel). I think you guys call it a hub?
Comment