How to install aquamist hfs-3 into r32 gtr

[TrevoR32]

Hello all, this may be better suited to tech... if so please move. i have purchased an hfs-3 off a member of the forum and am just looking for a few notes on how to install the system. mostly about the jet location and wiring. much appreciated.

Trevor.

[rob_96]

http://www.aquamist.co.uk/HFS3/manual/HFS3-v3.0w.pdf

that might help

[TrevoR32]

http://www.aquamist.co.uk/HFS3/manual/HFS3-v3.0w.pdf

that might help

thanks rob, i have looked at the manual.. just seeing what others did in their skylines.

[Bruizer]

I installed as per the manual..... Cheers!

[TrevoR32]

I installed as per the manual..... Cheers!

thanks bruizer. where did you guys mount the jets?

[Bruizer]

I have an HSF-6 kit which is slightly different but I did direct port. 6 nozzles into the runners.

You will most likely want your nozzles in the plenum inlet area. You'll have to drill and tap according to what size the nozzle adapters are.