Anyone have an R34 Brake master cylinder in their car? help!

[NismoS-tune]

Bought an R34 brake master cylinder, BM57 with ABS and it bolts up no problem however the low fluid wire connector is on the other side but also a different connector. I was under the impression that the R34 was a direct bolt on to the R32. Is this possibly a Z32 BMC? pictures up.

Only other part number I can find is 24U20 but I don't have fast if it's what I need to confirm.
First picture is where the new sensor connector is which is 2 round pins and shaped different that the R32 connector.


R32 connector normally goes on this side and would have 2 flat pins inside.


Curious to know if the others who bought R34 BMCs had to find an R34 connector or something?

The one I bought is: BM57. ABS.
The only other stamps I see: H30 and 24U20

EDIT: What I can find is not in english and states the BMC is R33 GTR but that doesn't solve my connector issue lol. Anyone parting out an R33 GTR?

[derk]

i have a R34 BM57 that im converting to non abs, you just need to go to the wreckers and cut the plug out of a 350z/ G35, possibly other cars aswell, but i know the G35/Z works for sure cuz thats what im using, id assume most other newer model nissan would also use the same style plug

[NismoS-tune]

i have a R34 BM57 that im converting to non abs, you just need to go to the wreckers and cut the plug out of a 350z/ G35, possibly other cars aswell, but i know the G35/Z works for sure cuz thats what im using, id assume most other newer model nissan would also use the same style plug

the ABS thing is no issue for me, I deleted my ABS last year lol. Soo that connector will work for sure then? What about your brake bias, what are you dong about that?

[derk]

yes, the plug from a g35/350z will work for sure, thats what i got my plug out of, cut it out of the car myself.

for the bias, im gonna run a wilwood prop valve, gonna need one down the road anyway..

[NismoS-tune]

I bought my wilwood provalve from JNS or Vex... can't remember. Was about $60.