Recommened sealer ?

[cortexx]

For the metal to metal surfaces ( eg water pump) .

any suggestions ?

[aN4rk1]

I used high temp black silicone when I did my water pump and timing belt.

[cortexx]

any particular brand ? permatex maybe ?

[Bossman]

http://www.permatex.com/products/Aut...one_Gasket.htm

Permatex Water Pump & Thermostat RTV Silicone Gasket, this one is especially designed for water pumps and thermostat. for other metal to metal Permaxtex has other gasket makers sealant too.

[cortexx]

.... off i go to partsource

[shawnr204]

what about for the sump?

[Bossman]

what about for the sump?

http://www.permatex.com/products/Aut...sket_Maker.htm

How about maximum oil resistance gasket maker? This I like:

http://www.permatex.com/products/Aut...sket_Maker.htm

For high performance engine up to 700 degree F.

The copper one should cover everything under the turbo...

[bignate]

Right stuff, Its the best for making gaskets... especially diff gaskets

[amnash]

http://www.permatex.com/products/Aut...sket_Maker.htm

How about maximum oil resistance gasket maker? This I like:

http://www.permatex.com/products/Aut...sket_Maker.htm

For high performance engine up to 700 degree F.

The copper one should cover everything under the turbo...

thats what i bought from crappy tire for a generic gasket maker. lol good to know its high quality.

[bignate]

its always advisable to use the correct gasket IF one is available. Dont use this stuff in place of a gasket.

[shawnr204]

thanks

[beacher1B0]

What about Nissan Liquid Gasket?