Please show me how to remove rear hubs (R32) !!!!

[Rush]

I need to take off the rear hubs (on my R32 Gtst) and I did everything that I was told to do (I got instructions from HERE).

Mine didn't come loose as easy as others and so I put a gear puller on the hub. I heard some cracks and then I undid the gear puller... gave a hub a few yanks and the whole axle came out of the diff!!

I'm pretty sure i broke something. F*CK.. Looks like its some ring around the end of the axle. I'll post a pic in a minute.

.. i'm about kill myself. i'm so sad. Please help.

[Rush]

Should that little ring be broken or no? Because i dont see how it could be put on if it wasnt.. its metal.

[Nismo_line]

take some pics man. would help abit

[Rush]

So i was told by a buddy that the diff ends will just click into place if you shove them back into the diff. So that's not a problem. Anyone know if the little ring needs to be replaced?

[Nismo_line]

no the rings look fine just make sure when you put the shaft back in it goes all the way in and grabs. if not then the teeth will get wrecked

[elroy]

http://www.300zx-twinturbo.com/cgi-bin/manual.cgi?list=ra&dir=&config=&refresh=&slide=8&cycle=off&scale=0&design=default&total=35

[amnash]

Lol this just gave mea good laugh

[hp44incgtr]

everything is still good just b careful when u put the axle back in the diff make everything is straight b4 you put it back in..