GTR vs GTS-T body differences

[MKIV]

I did some googling and I'm aware that the GTR has a different front end with wider fenders than the GTS, different side skirts and rear spats.

Other than that, are they somewhat similar?
Does the GTR have wider rear fenders as well? Same rear bumper?

Sorry, probably a simple answer for most of you, I'm just unaware.

[amnash]

rear is wider too

[dodger94]

doors have more defined lines as well,

[MKIV]

Thanks guys appreciate it

[dark_sky]

what is the difference in the doors?

[M13]

only diff between zenki and kouki, kouki has the reinforcement bar weighing 25kg/door

[Skym]

There's a bump in floorpan on R32 GTR, R32 GTS-4 (drivers side) for transfercase.

[dodger94]

the body lines are more defined so the match up with the wide lines on the rear of the GTR.

what is the difference in the doors?

[MKIV]

So the Gtr skirts probably wouldn't look great on a GTS in that case...

[BRN32]

The side skirts should line up faily decent afaik.

[dark_sky]

so to clear things up there is no difference in the r32 door from a GTR and a GTS-T. just like a r32 windshield. a windshield is a windshield is a windshield. a door is a door is a door. the only difference in the door at all that i can frind is what M13 said about the kouki has the reinforcement bar and the zenki does not. (zenki means early and kouki means late.)

[specialedition]

Does anyone know if the GTR front fenders fit direct on the gts-t upper rail or is there some slight modding to be done?

[R32FIEND]

Gts hoods are steel and way a ton. Gtr has aluminum hood. Good upgrade for gts guys. Wish I would have got one before I painted my car. Now I will just wait till I change mycolor again.

[MKIV]

I intend on getting a Gtr hood...if I can just find one

[Skym]

The R32 GTS, R32 GTR chassis are identical. It's just the wider front, rear fenders, bump in floorpan for transfercase on GTR, front bumper, hood, sideskirts (and holes in sills to suit), rear spoiler that are the major visual differences. The rest is the difference between 4wd, 2wd drivetrain, including subframes, fueltank capacity (GTS is steel, GTR plastic? and lighter with bigger capacity), etc.

As far as I know, R32 GTR front fenders have spacer washers under them and they bolt onto R32 GTS chassis.

This R32 GTS chassis (racecar) has the R32 GTR front fenders -

http://www.advan.co.nz/page48/files/collage_lb_image_page48_39_1.png

If want to do a R32 GTR conversion, R32 GTS-4 and add the fenders, etc. Some convert 4 door R32 GTS-4 into 4 door GTR.

This car was a R33 GTS-4 that was converted to R33 GTR spec -

http://www.advan.co.nz/page14/page17/page17.html

Used parts from a crashed R33 GTR chassis, R32 GTS racecar (shown in link above) with modified RB26 engine.