Gauge cluster mods?

[h4X6]

Was wondering if it possible to change the gauges inside the stock gauge cluster? Essentially I am looking to replace my stock boost gauge and oil pressure gauge in the cluster with autometer ones... Is this even possible without messing up all the other gauges?

Sorry if this has been covered. I did a fast search and didn't find anything about this,...

Sent from my A510 using Tapatalk 2

[collector240sx]

Anything is possible the real question is how much work is going to be involved.

Which gauge do you have (color of the back plastic panel, ie electric or cable speed sensor) if your asking about R32 or are you asking for a R33 gauge ?

I would take the gauge apart and look if you need to cut into the circuit board first, and if you do which circuit would be implicated.

It all depend on the size of the aftermarket gauge, since the stock gauge just screw onto the back plastic part, witch usually has nothing really behind it, you might just have to cut the back panel and find a way to attach the aftermarket gauges.

I already seen it being done on other cars. Some looked great, a lot didn't, really depended on the cluster.

Good luck

[h4X6]

Its a blue background gauge cluster. Essentially I want to replace the top two gauges aka boost and oil pressure and put my own 52mm gauges in there. Its also a r32 gtst


Sent from my Galaxy Nexus using Tapatalk 2

[frankiman]

whatever you can fit in there




or you can always do this, if you have the balls, and the money

http://skylinist.blog.eonet.jp/hcr32/2010/03/post-c5c1.html

[gtrjon]

whatever you can fit in there

or you can always do this, if you have the balls, and the money

http://skylinist.blog.eonet.jp/hcr32...post-c5c1.html

ultimate baller status

[h4X6]

Ohhh ya that is. **** would live to do that.

Good to know I can possibly do something. I'll have to take mine apart to have a closer look.


Sent from my A510 using Tapatalk 2