Suggestions and recommendations on Adjustable Camber arms?

[dc23]

wanted to reach out to the community with regards to an issue I have. I am running 18x10's with 255/35's all the way around my BNR32 but the front's rub under semi-hard driving and cornering.

I need to add some camber to my ride in order to fit without and rubbing.

Can I get some recommendations or suggestions on quality parts and where I can buy said parts? I'm based in Northern CA and looking for adjustable camber arms, front and rear.

thanks in advance,
dc

[caliber676]

SPL for the rear, fronts you could go ams but I would try to source something better

[dc23]

SPL for the rear, fronts you could go ams but I would try to source something better

I am looking at the driftworks for the front, maybe the entire set. Not sure tho.

As for the SPL, it only lists parts for the Z32. are they the same for the BNR32?

[Skym]

Ikeya Formula if you can afford it. Has vertical roll centre adjusters on arms, etc.

[MarusGTR]

I'll have my AMS up for sale soon, PM me if you're interested.

For FUCAS, they're pretty much all the same when it comes to the clamping design, haven't had trouble on the street with them. I'm changing to a spanner ring design for the track.

[dc23]

I'll have my AMS up for sale soon, PM me if you're interested.

For FUCAS, they're pretty much all the same when it comes to the clamping design, haven't had trouble on the street with them. I'm changing to a spanner ring design for the track.

thanks for the info. Might be interested in the AMS but I am trying to source new first. if that doesn't happen, maybe we can work something out. what were you looking to get for your AMS and what parts are they?

lastly, forgive my ignorance but what is FUCAS?

[MarusGTR]

FUCAS: front upper control arm. My AMS are only two years old and I didn't bind the bearings when I put them on so it should move as new. The only downside is that one of the collars was crushed on the track (that's why I'm changing them) but it still worked solid for street afterwards. My price should reflect this once I make the swap and put them for sale.

[Black BNR32]

I run these:

http://www.gktech.com/index.php/s13-180sx-s14-s15-200sx-r32-r33-skyline-rear-camber-arms.html

http://www.conceptzperformance.com/Cart/description.php?II=208&Car_Type=300&UID=2013042621594969.11.92.177

[beacher1B0]

I recommend KTS. Same design as the AMS, but Japanese.

[dc23]

thanks a ton to everyone for letting me know what you all got. I ended up going with the Stillen fronts and SPL rears - purchased and on the way now. Thanks again!