Announcement

Collapse
No announcement yet.

R35 BOV Vs. R32 ??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • R35 BOV Vs. R32 ??




    By looking at this picture, would the smaller hole of the R35 bov cause any problems vs the r32 opening?

    and I realise that the valve can easily be pushed on the R32 while on the R35 I have to use all my force to move it a bit. are they suppose to be fully stiff or not ?

    Thanks!
    Need detailing done to your car? I'm open to travel to detail your car :

    http://forums.gtrcanada.com/group-buys/54899-ontario-cobraa-detailing-group-buy.html

    Please follow my works and latest news/promotion at : https://www.facebook.com/Waxxonspa || Waxxon.com ||

  • #2
    R32 GTS-T BOV leaks at around 10psi and R32 GTR BOV is slightly higher (stronger spring).

    Early R35 GTR runs around 12psi (0.85bar x 14.5psi = 12.325psi) stock (amount of psi varies from car to car, so could be lower or higher, which varies the hp that engine produces) and later model (2012+) around 17.5psi (peak) for 550hp at engine. I would think that the 2012+ R35 GTR BOV's are modified (stronger spring) to suit the increase in boost level.

    I think the smaller holes on R35 GTR BOV's x 2 are due to the sequential transmission changes gear so quickly that turbo's keep spooled up. That means BOV's don't need to vent so much air.
    Last edited by Skym; 05-08-2013, 06:03 AM.
    RESPONSE MONSTER

    The most epic signature ever "epic".

    Comment

    Working...
    X