rb20det problems

[zillagod]

after some cam change and a timing belt done , my engine was ready to turn over . not so much now . there is an electrical gremlin. I would like to know what the bolt size is so I can ground my ignitor chip to my spark plug cover as the bolts got misplaced from the previous owner .

thanks

[Skym]

If haven't grounded the ignition system, check ignition fuse (can blow if ignition system is not grounded).

[zillagod]

If haven't grounded the ignition system, check ignition fuse (can blow if ignition system is not grounded).

ive read that the ignitor grounds onto the spark plug cover where it bolts on , I need the bolt size .

[craftz]

M5x0.8