R32 gtr caliper leak?

[DaveC]

I wanted to change the front pads on my r32 gtr last summer. So basicaly theres 4 bolt holding the caliper. 1 of these bolts have a metal pin going through its head. I removed the pin and started unscrewing. But as i unscrew it, some liquid(brake fluid i guess) started to leak from the caliper. Is that normal? Any advices?

Thanks

[nickisonfire]

Are you sure thats not the bleeder valve ou unscrew??

[DaveC]

Well thats the reason of my question, what i unscrewed was 1 of the 4 bolt holding the calper. Where is the bleeder valce supposed to be?

[RixR32]

Fyi you don't need to remove caliper if you're changing pads only. Just pop the retainer for the pins, slide em out, push pistons in enough and swap pads.
Not sure what you removed, but the only parts that would leak fluid are the bleeder valve or brake line itself.

Rick