R32 gts-r

[Skym]

R32 GTS-R on racetrack (the sound) -

http://www.youtube.com/watch?v=dc_3Zb4zbU4

R32 GTR is quick with 650hp, but R32 GTS-R with only 300-330hp can keep up (except on straights).

Engine bay -

http://www.youtube.com/watch?v=65HyHa980h8

Sound from outside of car when reving engine -

http://www.youtube.com/watch?v=e-vVJ3MZsvE

Enjoy.

[sb119]

Very nice car!

R32 GTR is quick with 650hp, but R32 GTS-R with only 300-330hp can keep up (except on straights).

It helps that the GTS-R has a much better driver behind the wheel too That GTR is a monster on the straights!

[zac3ne2nr]

Did they fit a RB26 plenum on the 20?

[Skym]

You can fit stock GTR intake plenum via using a custom made adaptor plate between throttlebodies, head.

This thread has a link to someone that has done it -

http://forums.gtrcanada.com/gts-tech/23856-will-rb26dett-intake-plenum-fit-rb20det.html

I think turbo is a Garrett GT2535 on above R32 GTS-R, so not too laggy compared to the stock GTS-R T04E/TO3 turbo (full boost at 4800rpm with stock turbo). GTS-R is capable of 444hp (engine) with stock turbo, stock engine, stock FMIC, intake, exhaust, ECU, removed restrictors, etc, so it's nowhere near what that engine is capable of producing. Some GTS-R race engines produced up to nearly 500hp. Around that racetrack, I read that lap record for RB20DET powered car (GTS-R) is 59 sec.

The copy GTS-R exhaust manifold (copy of the original exhaust manifold that was made by Nismo), copy turbo can be bought from R31 house.

This is the exhaust manifold (octopus legs as they call it) -

http://r31.biz/shop/products/item-501.html

Not cheap, roughly 4K CAD. I was suprised that the exhaust manifold fits, but they must have made some adjustments, so it clears strut tower on R32.