Tweet
Hey guys,
Last october I baught a gtr with the intention of keeping it, unfortunatly, I have to put it up for sale. This gtr was member Cobra's gtr, he is a detailing artist, and trust me, this car is dealership clean.
So here it goes:
1990 R32 gtr, Black, 38K on Nismo cluster, 105k on body.
Powered by a single Borg Warner RB26, this car put down a sexy 530 WHP on a mustang dyno, at only 16psi on 91 octane. Capable of 625-675 on water meth and 94 octane.
No corners on this car has been cut round, this car was built to dominate any road or competitors thats in its way.
The car is located in Montréal, Québec. Us buyers are responsible for shipping/Border crossing/pickup. I cover all fees to transfer vehicule in your name in canada.
Price: 23k USD - Price is 3k over a stock ticking bomb GTR these days.
For 500 US more: (23.5k us) I will give you all these parts, so you will never look for parts again. http://forums.gtrcanada.com/forum/me...-winter-builds
I accept cash, money transfer, certified/cashiers check, paid before hand or on pickup.
Motivated seller. Negociable price.
Contact info:
- Email: spitfire_412@hotmail.com
- Phone: five one four, two six one 8 0 1 8
- Private message
List of parts, Dyno and pictures:
ENGINE:
Head:
Supertech Valve springs
Supertech valves: Intake/ exaust
Supertech valve seals
Port and polish / resurface
Tomei poncam type R
Tomei adjustable cam gears
Nissan OEM gaskets for exaust and intake manifold
Tomei 1.2mm metal headgasket
MINES cam baffle plate
Block:
Tomei Oil restrictor
JE 86.5mm pistons
Eagle rods
ARP head studs
ACL race crank bearings
ACL race rod bearings
Balancing full rotating assembly (clutch all the way to dampener) to 10k RPM
Machined R32 crank to fit oil drive collar
REIMAX oil pump gear
N1 oil pump
RIPS RACING (AUS) Oil pan
Tomei oil baffle plates
ATI crank pulley
Nismo thermostat
Nissan water pump
Nismo engine mounts
Supporting mods:
Injector dynamics 1000cc
Nismo Fuel pressure regulator
Walbro 450 LPH fuel pump, rewired for constant 12v
Trust 4 inch intercooler
HKS hard piping
Mishimoto Radiator (lifetime warranty)
GKtech clutch fan
mishimoto catch can
HALTECH ECU
New oem coilpack
A/C delete
Turbo setup:
Borg Warner EFR 83/74 1,05 AR
Fullrace twin scroll manifold
2x Turbosmart wastegates - 44mm
Custom exhaust 3.5 inch + resonator + flex pipe + v-band with varex electronic valve
K&N air filter intake pipe
POWERTRAIN:
Full transmission refresh (syncros and inspection)
Nismo twin coppermix competition
Nismo 1.5 way front lsd
Nismo GT lsd pro 1.5 rear
Redline + Os Giken fluid
Gktech solid shifter bushing
Fullrace 4wd/2wd sensor
SUSPENSION / BRAKE upgrade, you dont build a racecar without being able to slow that power down:
R34 brembo calipers front and rear
DBA 4000 Rotor
Stainless steel brake hose
ATE blue fluid
BM57 Nissan master
Hawk HP+ pad
Front/rear strut bar
Gkteck roll center adapter
HSD monopro coilover 8/6kg
Project ikeya Traction arms
AMS complete hicas delete
AMS RUCA
NISMO transmission mount
Gktech solid steering bushing
Spacer solid subframe bushing
Gktech solid diff bushing
Cusco front/rear oversided sway bar
Greddy front/rear strut bar
Varrstoen ES2 17x9.5 +12 (curb rash)
New Dunlop Star spec 2 (255/40/17)
both axle rebuilted + boot changed (2014)
INTERIOR:
Custom Black/grey fake suede upholstery seat
Momo steering wheel with Quick release and lock
JDM Carpet
Nismo 320kmh cluster with 6k led mod
R34 pedal set + footrest + 5speed shifter
Momo handkbrake lever + drift button
ELECTRONICS:
STRI SLM 52mm meter white led
Oil press/temp, water temp, fuel press
New oem Nissan TPS
Haltech Platinum pro plug-in
Wideband haltech module
PLX DM-6 wideband
Haltech Ignititer 6 module
RAW brokerage CAS
New nissan water temp
Haltech MAP sensor
HID 6k kit with relay (the right way)
Day running light wired front and rear
2 way remote compustar 9000
New nissan coilpack harness
Mechman 270amp alternator
Big 3 to the alternator + grouding kit
Deep cycle Battery odessey
EXTERIOR:
Aero/bodywork ( done in 2014, about 1000 kms on it)
Trust front bumper
Trust rear valence
Carbon chibi wing
Gktech aero mirror blue lens
Suntek tint 50/35/20
Complete paint job + trim job
Fully wet-sanded + polishing
R33 copy front grill
carbon N1 front lip
Carbon R34 style cannard
slight tint on the tailight clearcoat
Black housing headlight
Smoked clear cover lens
All the reciepts of the parts come with the car.
CONS:
Curb rash on wheels
ABS light stays on, ABS not deleted yet.
Driver side A pillar trim has holes for gauges / pod.
2 small dents on the hood.
DYNO VID + SHEET (cellphone quality, im sorry)
PICS:
Note: Diffuser is not on car for alignement / dyno purposes. comes with the car.
Note: engine bay shot wasnt final setup with strut bars and properly placed catch can/ ignition module.
I can install a water methanol kit + dyno time for the 630+ whp setup, at buyers expense.
I can send pictures, videos or anything the buyer requests.
Last october I baught a gtr with the intention of keeping it, unfortunatly, I have to put it up for sale. This gtr was member Cobra's gtr, he is a detailing artist, and trust me, this car is dealership clean.
So here it goes:
1990 R32 gtr, Black, 38K on Nismo cluster, 105k on body.
Powered by a single Borg Warner RB26, this car put down a sexy 530 WHP on a mustang dyno, at only 16psi on 91 octane. Capable of 625-675 on water meth and 94 octane.
No corners on this car has been cut round, this car was built to dominate any road or competitors thats in its way.
The car is located in Montréal, Québec. Us buyers are responsible for shipping/Border crossing/pickup. I cover all fees to transfer vehicule in your name in canada.
Price: 23k USD - Price is 3k over a stock ticking bomb GTR these days.
For 500 US more: (23.5k us) I will give you all these parts, so you will never look for parts again. http://forums.gtrcanada.com/forum/me...-winter-builds
I accept cash, money transfer, certified/cashiers check, paid before hand or on pickup.
Motivated seller. Negociable price.
Contact info:
- Email: spitfire_412@hotmail.com
- Phone: five one four, two six one 8 0 1 8
- Private message
List of parts, Dyno and pictures:
ENGINE:
Head:
Supertech Valve springs
Supertech valves: Intake/ exaust
Supertech valve seals
Port and polish / resurface
Tomei poncam type R
Tomei adjustable cam gears
Nissan OEM gaskets for exaust and intake manifold
Tomei 1.2mm metal headgasket
MINES cam baffle plate
Block:
Tomei Oil restrictor
JE 86.5mm pistons
Eagle rods
ARP head studs
ACL race crank bearings
ACL race rod bearings
Balancing full rotating assembly (clutch all the way to dampener) to 10k RPM
Machined R32 crank to fit oil drive collar
REIMAX oil pump gear
N1 oil pump
RIPS RACING (AUS) Oil pan
Tomei oil baffle plates
ATI crank pulley
Nismo thermostat
Nissan water pump
Nismo engine mounts
Supporting mods:
Injector dynamics 1000cc
Nismo Fuel pressure regulator
Walbro 450 LPH fuel pump, rewired for constant 12v
Trust 4 inch intercooler
HKS hard piping
Mishimoto Radiator (lifetime warranty)
GKtech clutch fan
mishimoto catch can
HALTECH ECU
New oem coilpack
A/C delete
Turbo setup:
Borg Warner EFR 83/74 1,05 AR
Fullrace twin scroll manifold
2x Turbosmart wastegates - 44mm
Custom exhaust 3.5 inch + resonator + flex pipe + v-band with varex electronic valve
K&N air filter intake pipe
POWERTRAIN:
Full transmission refresh (syncros and inspection)
Nismo twin coppermix competition
Nismo 1.5 way front lsd
Nismo GT lsd pro 1.5 rear
Redline + Os Giken fluid
Gktech solid shifter bushing
Fullrace 4wd/2wd sensor
SUSPENSION / BRAKE upgrade, you dont build a racecar without being able to slow that power down:
R34 brembo calipers front and rear
DBA 4000 Rotor
Stainless steel brake hose
ATE blue fluid
BM57 Nissan master
Hawk HP+ pad
Front/rear strut bar
Gkteck roll center adapter
HSD monopro coilover 8/6kg
Project ikeya Traction arms
AMS complete hicas delete
AMS RUCA
NISMO transmission mount
Gktech solid steering bushing
Spacer solid subframe bushing
Gktech solid diff bushing
Cusco front/rear oversided sway bar
Greddy front/rear strut bar
Varrstoen ES2 17x9.5 +12 (curb rash)
New Dunlop Star spec 2 (255/40/17)
both axle rebuilted + boot changed (2014)
INTERIOR:
Custom Black/grey fake suede upholstery seat
Momo steering wheel with Quick release and lock
JDM Carpet
Nismo 320kmh cluster with 6k led mod
R34 pedal set + footrest + 5speed shifter
Momo handkbrake lever + drift button
ELECTRONICS:
STRI SLM 52mm meter white led
Oil press/temp, water temp, fuel press
New oem Nissan TPS
Haltech Platinum pro plug-in
Wideband haltech module
PLX DM-6 wideband
Haltech Ignititer 6 module
RAW brokerage CAS
New nissan water temp
Haltech MAP sensor
HID 6k kit with relay (the right way)
Day running light wired front and rear
2 way remote compustar 9000
New nissan coilpack harness
Mechman 270amp alternator
Big 3 to the alternator + grouding kit
Deep cycle Battery odessey
EXTERIOR:
Aero/bodywork ( done in 2014, about 1000 kms on it)
Trust front bumper
Trust rear valence
Carbon chibi wing
Gktech aero mirror blue lens
Suntek tint 50/35/20
Complete paint job + trim job
Fully wet-sanded + polishing
R33 copy front grill
carbon N1 front lip
Carbon R34 style cannard
slight tint on the tailight clearcoat
Black housing headlight
Smoked clear cover lens
All the reciepts of the parts come with the car.
CONS:
Curb rash on wheels
ABS light stays on, ABS not deleted yet.
Driver side A pillar trim has holes for gauges / pod.
2 small dents on the hood.
DYNO VID + SHEET (cellphone quality, im sorry)
PICS:
Note: Diffuser is not on car for alignement / dyno purposes. comes with the car.
Note: engine bay shot wasnt final setup with strut bars and properly placed catch can/ ignition module.
I can install a water methanol kit + dyno time for the 630+ whp setup, at buyers expense.
I can send pictures, videos or anything the buyer requests.
Comment