Announcement

Collapse
No announcement yet.

Veilside GTR - R32 500+whp

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Veilside GTR - R32 500+whp

    This is a 1990 R32 Nissan Skyline GTR wearing a Veilside EIII Widebody kit (Fenders all around minus bumpers)
    http://www.veilsidejpn.com/en/product/nissan/r32_gtr_e3_complete_kits.php


    Photos Here: https://vancouver.craigslist.ca/pml/...257717354.html

    Engine:
    Twin HKS 2530's
    HKS dump pipes
    HKS Front pipes
    Sard sports cat + Apexi Exhaust.
    Currently Running a cat delete test pipe and Custom built V-Band Quick Release 4'' straight pipe exhaust from cat back.
    With the V-Band the exhaust can be swapped in 10 minutes.

    (Exhaust with Sard cat + Apexi Muffler ->https://www.instagram.com/p/BMLHtjGA...by=j.ceballos_
    And Exhaust running straight pipe headers back
    ->https://www.youtube.com/watch?v=KKwa...ab_channel=JBC
    -> https://www.youtube.com/watch?v=T9_l...ab_channel=JBC)
    HKS 272 in /272 ex cams 9.1 lift
    HKS adjustable cam gears
    Sard 660cc injectors
    Nismo fuel pump and FPR
    Koyo Radiator
    Greddy hard pipe kit
    Z32 air flow meters
    Nismo triple plate clutch.
    Essential oil catch can
    Cusco brake cylinder stopper
    carbon cam gear cover
    carbon plug cover
    carbon intake manifold cover
    carbon JIC magic front strut bar
    Cusco rear strut bar
    Apexi AVCR boost controller
    Apexi power FC with commander.
    Currently Running RWD.
    513-RWHP, 406 Tq at 20PSI
    442-RWHP, 307 Tq at 12 PSI

    Exterior:
    Veilside EIII Fenders front and rear.
    Pearlescent White Paint (blue shimmer in person)
    Carbon canards.
    VIS Racing Carbon hood with Aerocatch locking latches.
    Seibon carbon trunk
    Rotora carbon rear wing .
    Ganador carbon side mirrors.
    LED Tail Lights - Bright

    Interior:
    2x Bride GIASII Low max Adjustable Seats.
    Keys Racing Wheel 325mm
    Sportline quick release hub
    Nismo Carbon Shift Knob
    Defi oil pressure gauge
    Nismo triple din gauges
    Robsons Shift Boot, Brake boot and centre console pad.

    Wheels/Tires:
    Work Meister S1 3piece with Brand New Falken RT615K's
    Front: 18x10+10 - 275/40/18's
    Rear: 18x 11.5-16 with 295/40/18's

    Brakes
    Front - Alcon/Greddy 4pot calipers - Endless Race pads, 13.5inch Rotors, Stainless lines
    Rear - Ksport 6pot calipers - Ferodo pads, 13inch rotors
    Shell Dot 5 advanced


    The paint is going to need to be redone at some point.
    The Widebody kit has been on the car many years and has various small stress cracks in corners. I have photos of each per request.
    Also bubbling on one fender.
    Wheels could use a refinishing (anodized coating has begun to oxidize)

    Less than 700km ago
    Coolant Flush, New MAF, New Injectors, New RB26 Top, Middle, and Lower Injector seals replaced, new Fuel Pump
    Boost Leaks fixed. Brand New Oil lines to Filter Relocation.

    Sorry. Cannot trade. Car has to be sold.
    Price: $33,00 CAD OBO

    I am a very motivated seller as my wife and I are moving to the UK in a few months. The car has to go.
    Shoot me a message and make an offer

    Car Located in Vancouver BC.
    Last edited by doublejceballos; 08-10-2017, 01:42 AM.
    Originally posted by Oakville
    that, is what us oakvillians like to call an 'instabone'
Working...
X