Feeler: Polished Divided Twin Turbo pipe

[cobrAA]

A +10-12 whp gain and 10lbs of torque compared to the stock pipe !! ( Proven on the dyno by Vulcain's GTR, stock excepting usual exhaust,intake,fuel pump upgrade)

The plate have also an angle inside the pipe for even better flow.

Then the pipe is polished to restore the shine; Take between 6 to 8 hours of sanding and compound.

Finally, I put a high-temp clear coat, let it cure 24h. Then, put a high temp metal sealant for a slick touch and shine and let it cure another 24h.

This was my first pipe and I guarentee, I will do better next time.

Before:


After:



Price: 260$ + shipping.

Will give a 50$ refund if you send me your stock pipe.

** If you want, I can polish any engine part, Just ask by PM**.

[Rapier46]

$260?

http://forums.gtrcanada.com/showthread.php?t=45862

not to rain on your parade, but that one, same exact thing, $175. just to make you aware.

[cobrAA]

Yeah I know. but who got their pipe loll!?? I think everybody got rip off. So, what is the point to ask 175$ if you don't get the pipe and get a refund 3 month later.

Also, is that 175$ pipe polished ?? It take AT LEAST 6 hours to polish one. + all the materials it takes. You have to pay that too.

[bobbo]

Probably but I'll confirm by the middle of the week to say for certain.

[DJ]

Wouldn't take 6-8 hours to polish that...

[Kras]

Offer a polished and non polished variant

[Turboholic]

I am hoping that is not the finished polish. No reflection?

[bobbo]

I am hoping that is not the finished polish. No reflection?

Really?!?

[natetheguy]

if you don't polish the pipes and just weld the plate in there and charge less I think you would be in business.

[cobrAA]

Here's my situation,

Vulcain is doing the weld job, he ask 175 and offer a 50$ discount if you give him the original pipe. But he doesn't seem to want to deal with shipping and payment. We live close together so I thought I could take that ''business'' and deal with shipping and payment but nobody work for free!

So, I thought I could offer a polished version of his work and get my ''piece of cake''. But if nobody like it. It's fine. Try to contact Vulcain by PM and ask him for a divided pipe .

Alex

[cobrAA]

Wouldn't take 6-8 hours to polish that...

There's a lot of round and corner...! Anyways, I will explain in french if you want more info.