525cc Injectors

[Bignoga]

Up for sale is six(6) Delphi 525 Top feed injectors used but in good condition.

Price 225$

Product ID: 17113738
DELPHI 50lb/hr INJECTOR

DELPHI 50 LB/HR INJECTORS

Part Number 17113738 (OE # 17104487)

Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec

Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec

Dynamic Flow Rate: 1.1 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa)

Dynamic Flow Rate: 1.3 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa)

Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)

Cone Spray Angle - 22.4 degrees - Single spray cone. Approximate cone angle for 90% of spray volume

Ball/Seat Design with 6-Hole Diffuser Disc

[RSi]

how muchey?

[Bignoga]

Sorry price is 225$

[LettoGTST]

Any pic's?

[Bignoga]

sorry dont got pics at this time.

[Bee-RSkyline]

nice price

[Bignoga]

these are still available.

[dcox250]

So no mods at all required just plug and play into RB20 right?

Sorry..newb

[MattiasJacobs]

I would imagine you'd need a retune. Plus, IMHO. Don't buy used injectors unless a recent flow test was done and you were shown the sheet. Im stuck trying to source 2 new injectors which is a major PITA! GLWS tho free bump!

[Bignoga]

Brought her back from the dead I see? These are sold

Edit: also I believe GTR are high impedance and you would need low for a gtst

[craftz]

From meggala.com
The injectors the Nissan motors use and their sizes stock.

RB20 det uses top feed high impedance injectors 270cc
RB25 uses side feed high impedance injectors 370cc these are the same as the sr 20 det.
RB26 uses top feed low impedance injectors. 440cc
SR20 uses side feed high impedance 370cc injectors (same as rb25)
VG30dett uses side feed high impedance 370 cc injectors (same as above)
N/A engines I have not included these but are generally smaller than their turbo counter parts.

rb30 e & et 250cc low impedance