Tweet
Hey guys, I'm going to de-mod my s13 in order to sell it for less.
I have also merged all of my for sale threads into this one single thread!
here goes.....
-r32 GTR front calipers (bigger than 300zx) with cross drilled rotors and pads in excellent shape w/ stainless steel braided lines $400
-s15 5 lug front spindles and hubs, rear spindles and hubs and s13 lcas with s14 ball joints $400 + your s13 4 lug, and s13 front lca's
-3" megan testpipe $40 + your stock s13 cat
-s13 Apexi N1 Evo (stainless steel) 3" catback exhaust $400 + your stock catback
-uras knock off front bumper and side skirts for s13 (bumper works for popups, side skirts will fit both coupe and hatchback) $450 for both or $250 each
- rear wide body for s13 coupe $250
I have a sweet seat setup for sale it sits a lot lower than a stock seat allowing your head to not hit your roof especially if you have a sunroof, it also holds amazingly, looks sick and is super light easily 10-15 pounds lighter than stock seat. the seat was purchased about a year and a half ago and is still in amazing shape...
I'm 5'10, 32 waist fits me good could fit someone a bit bigger or a bit smaller too
-Bride low mount Type FG seat rails
-border carbon kevlar black bucket seat
$600 -------> price drop $560
VOLK RACING CHALLENGE wheels $600
These wheels are very light weight and they are forged just like TE37's they are very very strong. They balance fine and feel great even if your driving 250km/h. I'm currently running them on my car with 25mm bolt on spacers and they sit very nice. I'm posting them up for sale because over the winter I'm going wide body and I'll be running wider wheels...
-Bolt Pattern 5 x 114.3
-Size 18 x 9 +40
-Tire specs :
Front: 225/40/18 forget the name of the tires will check, lots of tread
Rear: 245/40/18 Goodyear Eagle LS2000, low tread
This is a current pic of them on my car:
This is what they look like clean (note in these pics it does not show the newer front tires that are mounted on the wheels currently):
SR20 STUFF:
-taka stainless turbo lines for t25/t28 bottom mount $160
-OEM SR Exhaust manifold $50
-SR Flywheel (2,000km's since being resurfaced)$50
-S14 SR head $250
-SR lower engine harness uncut $20
-SR coil pack harness $20
-S14 SR cams $60
-s13 sr upper coolant neck $20
-s14 SR idle air control valve (iacv) $40
-s14 SR vtc solenoid $50
-SR auto tensioner $50
-S14 SR transmission(does not come with a metal cover inside the bellhousing, can swap yours off your old tranny) unknown condition otherwise $120
-8 OEM SR rockers $60
-s13 SR fuel rail with fpr (replace your damaged / bent one)$50
-SR transmission metal dust shield $20
S13 STUFF:
-s13Chuki front turn signal lenses $10 for the pair
-The little metal trim piece under s13 hatch tail lights (NO RUST MINTTT CHARCOAL) $50
-S13 Axles $50 each
-S13 steering column with key $40
- pair of s13 used 4 lug front rotors in great shape $20
-hatch center tail light $20
-hatch drivers side tail light $20
-s13 washer fluid tank $40
-s13 gauge cluster plastic surround $20
-RHD s13 power steering rack $80
-s13 rad support (perfect for repairing your smashed s13 front) $140
-180sx rebar cut for fmic $40
-s13 wiper motor $20
-rust free s13 front cross member $100
-s13 ka downpipe mint shape with AIV pipe undamaged $30
-s13 rear traction rods $30 for both
-s13 hatch privacy cover $20
-s13 front drivers side knuckle with 4 lug hub $40
-s13 rear passengers side knuckle with 4 lug hub $40
-180sx front and rear swaybars with d bracket and bushing, no endlinks, no rust $40 for both
-180sx tension rod brackets no rust $60 for pair
-black s13 gas tank door $20
-gas tank $40
-driver and passenger power mirrors $40 for both
S14 STUFF:
-JDM S14 Kouki Gauge Cluster $100
-s14 Zenki Grill oem green $10
-s14 rucas cusco heim joints are perfect, adjustment bolts need to be unsized $160 (just need some wd40 and patience)
-s14 speed sensor $60
-S14 coolant res $40
-zenki center tail light $20
-rust free s14 front cross member $100
-S14 diff cover $50
-JDM rust free s14 rear lower control arms $40 each
-JDM rust free s14 rear traction rods $30 for both
MISC STUFF:
-Greddy 60mm A pillar Gauge POD $40
-sr/ka engine mounts $50 a pair
-polyurethane filled engine mounts (they are solid do not move) $60
-KA flywheel $40
-3" Vibrant highflow cat flanged for s13/s14(passed last e-test with this on a SR without doing a hotrod etest) $120
-K&N used 3" cone air filter $30
-ka upper rad hose $10
-s13/s14 jdm transmission mount / cross member reinforced with polyurethane $50
-really loud horn of jdm clip $20
-1 z32 rear rotor $10
-1 kicks bolt on spacer 15mm i think $20
-cracked megan turbo elbow easy to weld it up and its good again $40
CA18 STUFF:
-ca18det side mount intercooler with cold pipe $20
-ca18det ignitor chip can be rewired to work with sr20 $20 each
-ca18det mafs $20
I might have more stuff so PM me
LOCATED IN THE GTA
if you want something posted text me 647.895.0067
I have also merged all of my for sale threads into this one single thread!
here goes.....
-r32 GTR front calipers (bigger than 300zx) with cross drilled rotors and pads in excellent shape w/ stainless steel braided lines $400
-s15 5 lug front spindles and hubs, rear spindles and hubs and s13 lcas with s14 ball joints $400 + your s13 4 lug, and s13 front lca's
-3" megan testpipe $40 + your stock s13 cat
-s13 Apexi N1 Evo (stainless steel) 3" catback exhaust $400 + your stock catback
-uras knock off front bumper and side skirts for s13 (bumper works for popups, side skirts will fit both coupe and hatchback) $450 for both or $250 each
- rear wide body for s13 coupe $250
I have a sweet seat setup for sale it sits a lot lower than a stock seat allowing your head to not hit your roof especially if you have a sunroof, it also holds amazingly, looks sick and is super light easily 10-15 pounds lighter than stock seat. the seat was purchased about a year and a half ago and is still in amazing shape...
I'm 5'10, 32 waist fits me good could fit someone a bit bigger or a bit smaller too
-Bride low mount Type FG seat rails
-border carbon kevlar black bucket seat
$600 -------> price drop $560
VOLK RACING CHALLENGE wheels $600
These wheels are very light weight and they are forged just like TE37's they are very very strong. They balance fine and feel great even if your driving 250km/h. I'm currently running them on my car with 25mm bolt on spacers and they sit very nice. I'm posting them up for sale because over the winter I'm going wide body and I'll be running wider wheels...
-Bolt Pattern 5 x 114.3
-Size 18 x 9 +40
-Tire specs :
Front: 225/40/18 forget the name of the tires will check, lots of tread
Rear: 245/40/18 Goodyear Eagle LS2000, low tread
This is a current pic of them on my car:
This is what they look like clean (note in these pics it does not show the newer front tires that are mounted on the wheels currently):
SR20 STUFF:
-taka stainless turbo lines for t25/t28 bottom mount $160
-OEM SR Exhaust manifold $50
-SR Flywheel (2,000km's since being resurfaced)$50
-S14 SR head $250
-SR lower engine harness uncut $20
-SR coil pack harness $20
-S14 SR cams $60
-s13 sr upper coolant neck $20
-s14 SR idle air control valve (iacv) $40
-s14 SR vtc solenoid $50
-SR auto tensioner $50
-S14 SR transmission(does not come with a metal cover inside the bellhousing, can swap yours off your old tranny) unknown condition otherwise $120
-8 OEM SR rockers $60
-s13 SR fuel rail with fpr (replace your damaged / bent one)$50
-SR transmission metal dust shield $20
S13 STUFF:
-s13Chuki front turn signal lenses $10 for the pair
-The little metal trim piece under s13 hatch tail lights (NO RUST MINTTT CHARCOAL) $50
-S13 Axles $50 each
-S13 steering column with key $40
- pair of s13 used 4 lug front rotors in great shape $20
-hatch center tail light $20
-hatch drivers side tail light $20
-s13 washer fluid tank $40
-s13 gauge cluster plastic surround $20
-RHD s13 power steering rack $80
-s13 rad support (perfect for repairing your smashed s13 front) $140
-180sx rebar cut for fmic $40
-s13 wiper motor $20
-rust free s13 front cross member $100
-s13 ka downpipe mint shape with AIV pipe undamaged $30
-s13 rear traction rods $30 for both
-s13 hatch privacy cover $20
-s13 front drivers side knuckle with 4 lug hub $40
-s13 rear passengers side knuckle with 4 lug hub $40
-180sx front and rear swaybars with d bracket and bushing, no endlinks, no rust $40 for both
-180sx tension rod brackets no rust $60 for pair
-black s13 gas tank door $20
-gas tank $40
-driver and passenger power mirrors $40 for both
S14 STUFF:
-JDM S14 Kouki Gauge Cluster $100
-s14 Zenki Grill oem green $10
-s14 rucas cusco heim joints are perfect, adjustment bolts need to be unsized $160 (just need some wd40 and patience)
-s14 speed sensor $60
-S14 coolant res $40
-zenki center tail light $20
-rust free s14 front cross member $100
-S14 diff cover $50
-JDM rust free s14 rear lower control arms $40 each
-JDM rust free s14 rear traction rods $30 for both
MISC STUFF:
-Greddy 60mm A pillar Gauge POD $40
-sr/ka engine mounts $50 a pair
-polyurethane filled engine mounts (they are solid do not move) $60
-KA flywheel $40
-3" Vibrant highflow cat flanged for s13/s14(passed last e-test with this on a SR without doing a hotrod etest) $120
-K&N used 3" cone air filter $30
-ka upper rad hose $10
-s13/s14 jdm transmission mount / cross member reinforced with polyurethane $50
-really loud horn of jdm clip $20
-1 z32 rear rotor $10
-1 kicks bolt on spacer 15mm i think $20
-cracked megan turbo elbow easy to weld it up and its good again $40
CA18 STUFF:
-ca18det side mount intercooler with cold pipe $20
-ca18det ignitor chip can be rewired to work with sr20 $20 each
-ca18det mafs $20
I might have more stuff so PM me
LOCATED IN THE GTA
if you want something posted text me 647.895.0067
Comment