F/S aftermarket for rb26... Apexi, HPI, HKS, Tomei, greddy...

[jdms13rhd]

***SOLD***RB26 twin turbo downpipe. Aftermarket.
***SOLD***RB26 oil pan modified for 2WD (Diff is cut off and shaft removed, then welded).
***SOLD***Tomei RB26 oil pan baffle kit.
***SOLD***Greddy type R blow off valve. Buy yourself a man's bov and leave the SSQV seal squeeks for the Tiburon's.
***SOLD***sard (denso) 720cc injectors.
***SOLD*** Greddy/trust RB26 hard piping. Used condition.
***SOLD*** coupler with 2 worm gear clamps.
***SOLD***HKS RB26 hard piping. Used condition.
***SOLD***GT35r .82 with Borg Warner compressor wheel. (7 blade) 62mm inducer, 82mm exducer. Holset Compressor housing. Custom backplate machined for bearing housing. I just bought this turbo and need to sell. Changed my set-up.
***SOLD***Custom piping RB26DETT
***SOLD***HKS fuel rail. 10.5mm. BNIB with hardware.
***SOLD***Greddy oil cooler/relocation kit.
***SOLD***RB25 trans with an os 1-3 gear kit.
***SOLD***AEM boost controller/gauge combo.
***SOLD***RB30's. Complete short blocks. Crank, rods, pistons and pumps. Good cranks.

-$350 HKS EVC Boost controller.






-$150 AMS GTST brake pads. Front and rear. BNIB!


-$65 AMS o2 sensor for R32. BNIB!


-$220 Good catch can set up (minus hose). Its a oil separator with a large breathable catch. Built for r32. Mounts in front of the battery.


-$800 Nismo Coppermix single. $1250 to buy these new. I only used mine for a very very short period.




-$55 for one rebuilt OEM RB26/RB25 clutch slave cyl.

-$400 for a 2 way diff. Unknown brand. Works awesome! Drifters drop in special for S13. 6 bolt axle flanges. Non abs.

[cschepp]

What exactly do you mean by multi switching system Allen? Like attessa controller or...? Anyways interested in that

[jdms13rhd]

What exactly do you mean by multi switching system Allen? Like attessa controller or...? Anyways interested in that

I had it controlling my fans only when I did use it and was going to use it for a pressure switch for when i hooked up my accusump. I haven't put much thought into what else it could be used for but you could get creative.

"GReddy Multi Switching System (MSS) is a two-channel programmable general output controller. The MSS is cockpit-mounted and wires into a vehicle ECU harness and/or optional GReddy sensors and the electronic devices you want to control. The MSS can control up to 2 separate electronic devices with the capability of turning on and off nitrous, solenoids, I/C-sprayers, warning lamps and many other electronic devices. Each channel can be programmed to activate through one, two or three parameters such as RPM, speed, temperature, boost or any other analog signal. With GReddy optional MSS Relay Kit, you can activate fuel pumps, electric fans and other higher drawing items. The multi color display can also monitor the inputted signals for peak-hold and warning values."

http://www.nengun.com/greddy/multi-switching-system

I also dont have any instructions. So it would take a bit of time to figure it out and how to use it properly.

And appears to be discontinued.

[Mitsuboost30]

got any pics of the hks piping? and the tomei oil baffle plate?
want to see condition of both

[gtrjon]

did you sell the fuel rail/fpr?

[jdms13rhd]

got any pics of the hks piping? and the tomei oil baffle plate?
want to see condition of both

I'll try to grab pictures of everything on Saturday.

The tomei baffle is BRAND NEW. I threw out the box tho, so no fan boy box and sticker for you. hehe

[jdms13rhd]

did you sell the fuel rail/fpr?

Not yet. I was going to wait here a few days to figure out what im building. I might still use that stuff, or at least the injectors. thats why I didnt list that stuff yet. Got to get back to another guy too before you. But I might have another rail kickin around. You can always drill any 10.5 rail to 11mm if you have a drill press. Super easy. or weld an fittings on a stock rail and call it a day which is what I might just do. I'll let you know. man do I ever ramble.

[jdms13rhd]

I took pictures yesterday, but when uploading them today, lots of them were missing. I am going to Alberta in another hour for a week and wouldn't be able to do much as far as shipping until then anyways. So sorry for the delay, Im back on the 11th and will get more organized. I'll post pictures of the PFC, Greddy MSS, Pan and baffles within the next day or two, the others are magically missing from my phone. So no pictures of the piping till I get back, sorry.

[NickMy]

intrested in the oil pan.. pmed you

[jdms13rhd]

sorry for the further delay guys. Ive only been able to see my computer twice in the past 2 weeks.

I am still super busy and I will get to everyone who pm`d me and give a priority basis on that.

I also just added a ton more parts. I am able to talk to anyone and ship out anytime! I am leaving to Montana on holidays at the end of the month for a week. I wont have my phone on during that time and will have to get back to all missed calls/pm's when I am back early aug.

[TyrelLee]

Interested in tranny.

[cobrAA]

o2 sensor? do rb26 need 2 of them or juswt one?

[jdms13rhd]

Interested in tranny.

pm me a contact number so I can give you a call

[jdms13rhd]

o2 sensor? do rb26 need 2 of them or juswt one?

rb26 use 2 o2 sensors. They have different style plugs. I have some kicking around im sure. Do you need any?

[TyrelLee]



You been pm'd