Tweet
So as most of you know i am taking a break from skylines for a bit. This has been a very long process of building 3 or 4 of them and now its time to let go. The parts will be listed with pricing and as many pictures as possible. No trades will be considered and low balls will be laughed at and made fun of.
Price is obo, It will be first come first serve basis not who calls dibs forst but whoever pays first:
S2 Rb25 Motor: includdes tomei 1.2 head gasket, tomei timing belt, arp head studs, n1 oil and water pump, modded rb 26 covers to fit the rb25, all engine pumps and accessories- $3500
S2 Rb25 Transmission w/ tomei short shifter(i will not part the shifter from the trans so dont ask)- $800
Exedy Twin plate clutch w/ throw out bearing- $800
Top mount turbo manifold, external wastegate, and turbo(manifold is heat wrapped), it is ebay stuff so the price will show- $350
Yellow Jacket coils for s2- $300
Genuine Greddy manifold- $700
Q45 Throttle body- $100
One piece lightweight driveshaft for swap- $400
Driftworks Hicas supreme kit- $250
Gts cluster with white backing-$100
CF pod where center vent is- $50
Aem wideband- $150
Aem Tru boost- $250
Apexi boost and oil pressure gauges to replace faulty stock ones- $100
Greddy A pillar pod(discontinued now)- $100
Nismo floor mats for the r32- $250
Shifter and e brake boots in perforated black with red stitch- $50
Grex Shift knob(red top)- $60
JL audio speakers- $250
Entire front and rear conversion kit- $3000 (local preferred)
Work XD9 rims in white: Front(17x9.0 w/+18) Rear (18x10.0 w/+17)-$1600
Greddy front mount intercooler with rigged piping for top mount - $300
Powerhouse fuel Setup: 725 cc injector dynamic injectors, Dual feed rail, Braided lines fron to rear, fuel hat with 2 pump capabilities, tomei pump, in line fuel filter and aeromotive fpr- $1400
R32 gtr front and rear seats-$400
Z32 maf with apexi filter- $100
Tein Coilovers taken out to look at otherwise never mounted(thinking monoflex but will confirm after)- $1200
Apexi power Fc Ljetro for ECR33- $1200
Nardi deep corn wheel with works bell quick release- $750
AMS slotted rotors and pads front and rear- $150 only drove 3 months on them
Non rolling chassis with 17 digit re vin(this makes it easier to deal with mto and insurance companies), the only thing to make it a roller will be Wheels and will come with a full interior minus the seats- $2500
As many of you know i have spent alot of time and money on this car. It was my pride, passion and love for the past 5 years easily. I now need to take a step back and take other things in my life a little more seriously. This stuff will start to be sold off once the interest is there for half of the stuff or simply a buyer for the engine, trans and chasis.
Now i will be taking tabs on who asks for what first in the mean time so let me know. First come first serve ladies/gents......
Here is a link with all the photo's:
Thanks for the interest,
Chris
Price is obo, It will be first come first serve basis not who calls dibs forst but whoever pays first:
S2 Rb25 Motor: includdes tomei 1.2 head gasket, tomei timing belt, arp head studs, n1 oil and water pump, modded rb 26 covers to fit the rb25, all engine pumps and accessories- $3500
S2 Rb25 Transmission w/ tomei short shifter(i will not part the shifter from the trans so dont ask)- $800
Exedy Twin plate clutch w/ throw out bearing- $800
Top mount turbo manifold, external wastegate, and turbo(manifold is heat wrapped), it is ebay stuff so the price will show- $350
Yellow Jacket coils for s2- $300
Genuine Greddy manifold- $700
Q45 Throttle body- $100
One piece lightweight driveshaft for swap- $400
Driftworks Hicas supreme kit- $250
Gts cluster with white backing-$100
CF pod where center vent is- $50
Aem wideband- $150
Aem Tru boost- $250
Apexi boost and oil pressure gauges to replace faulty stock ones- $100
Greddy A pillar pod(discontinued now)- $100
Nismo floor mats for the r32- $250
Shifter and e brake boots in perforated black with red stitch- $50
Grex Shift knob(red top)- $60
JL audio speakers- $250
Entire front and rear conversion kit- $3000 (local preferred)
Work XD9 rims in white: Front(17x9.0 w/+18) Rear (18x10.0 w/+17)-$1600
Greddy front mount intercooler with rigged piping for top mount - $300
Powerhouse fuel Setup: 725 cc injector dynamic injectors, Dual feed rail, Braided lines fron to rear, fuel hat with 2 pump capabilities, tomei pump, in line fuel filter and aeromotive fpr- $1400
R32 gtr front and rear seats-$400
Z32 maf with apexi filter- $100
Tein Coilovers taken out to look at otherwise never mounted(thinking monoflex but will confirm after)- $1200
Apexi power Fc Ljetro for ECR33- $1200
Nardi deep corn wheel with works bell quick release- $750
AMS slotted rotors and pads front and rear- $150 only drove 3 months on them
Non rolling chassis with 17 digit re vin(this makes it easier to deal with mto and insurance companies), the only thing to make it a roller will be Wheels and will come with a full interior minus the seats- $2500
As many of you know i have spent alot of time and money on this car. It was my pride, passion and love for the past 5 years easily. I now need to take a step back and take other things in my life a little more seriously. This stuff will start to be sold off once the interest is there for half of the stuff or simply a buyer for the engine, trans and chasis.
Now i will be taking tabs on who asks for what first in the mean time so let me know. First come first serve ladies/gents......
Here is a link with all the photo's:
Thanks for the interest,
Chris
Comment