Tweet
illest HellaFlush JDM R32/R33/R34 Parts - Huge SALE On Everything!
Name: Joey
Cell: 626-227-4255 (text preferred)
Location: Sherman Oaks, CA 91423 USA
Paypal - YES
Shipping - YES
All of these parts are my personal items. Either they are used on one of my drift cars or stored in the back of my shop. Most items are used unless stated otherwise. I don't sell janky,broken,or damaged parts.
Kakimoto Regu96 Catback Exhaust - $525 OBO
R32 G.A.B Coilovers - $400
Sparco Veloce Steering Wheel - $160
6
Apexi Carbon Fiber Strut Bar - $120
[B]
R33 Border Style Gauge Pod - $150
(ordered it for my r32 but it didn't feel like modding it to fit after receiving it)
R32 GTR Trunk Wing - $150
Scan Gauge 2 - $110
(only fits OBD2 cars. Works as a all in one gauge, fixes/Diagnoses CEL, connects to the OBD port)
R32 GTR Front Grille - $40
R34 Carbon Fiber Canards - $125
(can also fit r32 gtr bumper if positioned correctly)
Custom Painless Chasis Wiring Kit + Switch Panel - $450
(pre-wired. Legit full race wiring job. Nothing was skimped. Perfect)
Walbro 255lph Fuel Pump Kit - $75
JDM Weighted Shift Knob - $50
(only fits 10x1.25 - RB / SR / VG etc Transmissions, minor knicks/scratches. Weighted so it acts as a short shifter, about 5.5 x 2)
OG HKS Mechanical Boost Gauge - $90
(comes with wiring and HKS Gauge Pod)
NEW! Custom RB 6 Puck Clutch Setup - $200
(throwout bearing, pressure plate, 6 puck ceramic clutch, alignment tool. Good for about 350hp and 300tq)
326 Power Rep. Wing - $200
(no damages, pre drilled for installation)
PWR FMIC - $150
(good for about 400hp, bent fins, bent upwards on the bottom from previous installed brackets. Holds boost/no leaks and works great)
OG Nardi Steering Wheel - $150
NEW!Daytime Running Lights - $30
(fits almost any bumper, install is easy. Comes with the mounting brackets/wiring)
Custom Machine Gun Exhaust Tip - $60
(BEAST Mode! Sounds too intense. Track only type of cars)
Worksbell Hub Lock - $65
(shaved off bar code for extra security, comes with 2 keys)
Gracer/Trust Sideskirts - $200
? Rear Spats - $100
? Rear Camber Arms - $60
JDM S.W.A.T Front Strut Bar - $60
NEW* N1 Oil Pump - $300
Mishimoto RB Radiator - $165
(few bent fins, low mileage use. No leaks or issues)
Flex-A-Lite Dual Slim Fans - $140
(2 decals and has FAL markings on it. Damaged/Missing Bottom Piece!, doesn't affect performance)
Sparco Fighter Bucket Seat - $300
(same exact one from the Fast/Furious 2 Skyline. Light Fading on top and scratch marks where the brackets mount up. Grey Fiberglass backing)
G-Force Blue 4pt Racing Harness - $50
(expires 2012, overall good condition)
Custom CF S13 Gauge Cluster - $200
(Tachometer, Water Temp, Boost. Comes with Wiring. Carbon fiber backing can be removed and switched over to your cluster surround)
Nismo 2 Way LSD + Axles - $650
(about 5-10k miles, properly broken in. No issues)
NEW* Rb Water pump - $50
Greddy Style Intake Manifold - $180
(polished/welded/blocked off coolant areas/drilled for haltech)
SR20 Freddy Oil pan - $50
SR20 Wiseco 9:1 Forged Pistons - $300
about 5k-10k miles, no issues. Never overheated. Will work great)
SR20 Polished Crank - $150
SR20 Blitz Active Racing Clutch - $400
SR20 Blitz Active Racing Clutch - $125
AME Circular Spec*R's - $1,750 OBO
(18x9/18x10/+15/5x114.3 - GREAT condition, 9/10. Zero curb rash)
SR20 Upper Water Neck - $10
SR20 Stock Turbo Elbow - $10
SR20 Crank Angle Sensor - $50
--------------------------------------------------------------------------------------
SOLD PARTS AS OF 9/19/2011
Nismo Thermostat
Burnt Tip BlastPipes
Apexi Exhaust Control Valve
JDM Lightsaber Shift Knob
Ikeya Formula Shifter
Bee*R Rev Limiter
--------------------------------------------------------------------------------------
I am also looking to trade or buy these items!
(click link below to see what I need to purchase, cash ready in paypal!)
http://forums.gtrcanada.com/want-buy...ipped-usa.html
--------------------------------------------------------------------------------------
My Review Thread:
BookFace:
--------------------------------------------------------------------------------------
Cell: 626-227-4255 (text preferred)
Location: Sherman Oaks, CA 91423 USA
Paypal - YES
Shipping - YES
All of these parts are my personal items. Either they are used on one of my drift cars or stored in the back of my shop. Most items are used unless stated otherwise. I don't sell janky,broken,or damaged parts.
Kakimoto Regu96 Catback Exhaust - $525 OBO
R32 G.A.B Coilovers - $400
Sparco Veloce Steering Wheel - $160
6Apexi Carbon Fiber Strut Bar - $120
[B]
R33 Border Style Gauge Pod - $150
(ordered it for my r32 but it didn't feel like modding it to fit after receiving it)
R32 GTR Trunk Wing - $150
Scan Gauge 2 - $110
(only fits OBD2 cars. Works as a all in one gauge, fixes/Diagnoses CEL, connects to the OBD port)
R32 GTR Front Grille - $40
R34 Carbon Fiber Canards - $125
(can also fit r32 gtr bumper if positioned correctly)
Custom Painless Chasis Wiring Kit + Switch Panel - $450
(pre-wired. Legit full race wiring job. Nothing was skimped. Perfect)
Walbro 255lph Fuel Pump Kit - $75
JDM Weighted Shift Knob - $50
(only fits 10x1.25 - RB / SR / VG etc Transmissions, minor knicks/scratches. Weighted so it acts as a short shifter, about 5.5 x 2)
OG HKS Mechanical Boost Gauge - $90
(comes with wiring and HKS Gauge Pod)
NEW! Custom RB 6 Puck Clutch Setup - $200
(throwout bearing, pressure plate, 6 puck ceramic clutch, alignment tool. Good for about 350hp and 300tq)
326 Power Rep. Wing - $200
(no damages, pre drilled for installation)
PWR FMIC - $150
(good for about 400hp, bent fins, bent upwards on the bottom from previous installed brackets. Holds boost/no leaks and works great)
OG Nardi Steering Wheel - $150
NEW!Daytime Running Lights - $30
(fits almost any bumper, install is easy. Comes with the mounting brackets/wiring)
Custom Machine Gun Exhaust Tip - $60
(BEAST Mode! Sounds too intense. Track only type of cars)
Worksbell Hub Lock - $65
(shaved off bar code for extra security, comes with 2 keys)
Gracer/Trust Sideskirts - $200
? Rear Spats - $100
? Rear Camber Arms - $60
JDM S.W.A.T Front Strut Bar - $60
NEW* N1 Oil Pump - $300
Mishimoto RB Radiator - $165
(few bent fins, low mileage use. No leaks or issues)
Flex-A-Lite Dual Slim Fans - $140
(2 decals and has FAL markings on it. Damaged/Missing Bottom Piece!, doesn't affect performance)
Sparco Fighter Bucket Seat - $300
(same exact one from the Fast/Furious 2 Skyline. Light Fading on top and scratch marks where the brackets mount up. Grey Fiberglass backing)
G-Force Blue 4pt Racing Harness - $50
(expires 2012, overall good condition)
Custom CF S13 Gauge Cluster - $200
(Tachometer, Water Temp, Boost. Comes with Wiring. Carbon fiber backing can be removed and switched over to your cluster surround)
Nismo 2 Way LSD + Axles - $650
(about 5-10k miles, properly broken in. No issues)
NEW* Rb Water pump - $50
Greddy Style Intake Manifold - $180
(polished/welded/blocked off coolant areas/drilled for haltech)
SR20 Freddy Oil pan - $50
SR20 Wiseco 9:1 Forged Pistons - $300
about 5k-10k miles, no issues. Never overheated. Will work great)
SR20 Polished Crank - $150
SR20 Blitz Active Racing Clutch - $400
SR20 Blitz Active Racing Clutch - $125
AME Circular Spec*R's - $1,750 OBO
(18x9/18x10/+15/5x114.3 - GREAT condition, 9/10. Zero curb rash)
SR20 Upper Water Neck - $10
SR20 Stock Turbo Elbow - $10
SR20 Crank Angle Sensor - $50
--------------------------------------------------------------------------------------
SOLD PARTS AS OF 9/19/2011
Nismo Thermostat
Burnt Tip BlastPipes
Apexi Exhaust Control Valve
JDM Lightsaber Shift Knob
Ikeya Formula Shifter
Bee*R Rev Limiter
--------------------------------------------------------------------------------------
I am also looking to trade or buy these items!
(click link below to see what I need to purchase, cash ready in paypal!)
http://forums.gtrcanada.com/want-buy...ipped-usa.html
--------------------------------------------------------------------------------------
My Review Thread:
BookFace:
--------------------------------------------------------------------------------------
Comment