Everything you want or need for your RB26!!! Mostly BRAND NEW!!! OEM and A/M (apexi)

[fluffy_object]

Hey guys plans have changed from building up the RB26 to buying a RIPS RB30 shortly after I graduate school in december so I want to clear out all the parts I have laying around. most of them are either new or test fitted only (when I say test fit I mean not even run!) unless otherwise stated.

EVERYTHING IS OBO!

Brand New in package parts:
These were all ordered from ztune in BC a couple years ago and never installed, still in Nissan packaging! The prices listed were based on calling my local Nissan dealership (and rounding down to make my price a bit more competitive but again ALL PRICES ARE BEST OFFER!

Nissan RB26 N1 oil pump (part number 15010-24u01) asking $400 obo

Nissan RB26 water pump (part number 21010-58s25) asking $100 obo

Nissan RB26 timing belt (part number 13028-20p25) asking $90 obo

Nissan RB26 timing belt idler pulley (part number 13074-58s00) asking $100 obo

Nissan RB26 timing belt tensioner pulley (part number 13070-42l00) and timing belt tensioner spring (part number 13072-58s10) asking $100 obo for both

Nissan RB26 Front main seal (part number 13510-19v00) nissan wants $9, I'll throw it in for free if you're buying other parts and ask for it!

Nisaan RB26 cam/crank seal (part number 13042-16v00) nissan wants $19, no idea why but I have 5, asking $10 each or free if your buying other stuff and ask for it!

Ztune modified crank collar asking $200 obo


Test Fitted Only Parts:
These are parts that I purchased from other users (mostly on GTRC) that were advertised as new parts. I have test fitted them to my GTR but that is all, these parts have not been run at all other than the Power FC (which was only run through its automatic setup to confirm it was working when I bought it).

AMS Z32 mass airflow sensors (MAF) x2 (I can probably still find the original boxes) - AMS wants $179 each as advertised on GTRC, I'm asking $150 each obo

Apexi super suction kit to fit those Z32 MAF's onto your R32 GTR intake piping. (again I'm sure I can find the original box and probably even the japanese manual around somewhere) - asking $500 (this is more than fair)

Apexi Power FC with boost control kit and hand commander (ecu and hand commander were hooked up to confirm they were working when I bought it. never hooked up the boost control kit) asking $1000 obo

Again ALL PRICES ARE BEST OFFER!!! and if someone takes the power fc, super suction kit, and z32 mafs I will happily try to work out a package deal!

Once my engine is pulled to send some parts to Robbie @ RIPS for my build I will start parting out the rest so by all means send requests so I can get a list going.

[dustyGTR]

Would you consider separating boost control kit?

[Mitsuboost30]

All these prices are higher that the parts actually cost.

[fluffy_object]

Would you consider separating boost control kit?

no sorry

[fluffy_object]

All these prices are higher that the parts actually cost.

if you can prove that i welcome you to post links?
otherwise as i said all of the prices i have listed for oem parts were chosen by calling a nissan dealership here in manitoba, giving them the part number, asking how much they charge, and rounding DOWN from that.
IF my price is too high the only reason I can think of is nissan dealerships charge different prices in different provinces (or countries in your case considering it looks like your in NORTH CAROLINA, USA).
it was also noted MULTIPLE TIMES in the ad that everything is BEST OFFER... pay attention

[Mitsuboost30]

You asked for it.........
just dont want to see anyone ripped off!

and your dealers carry that stuff, ours dont. except for a few in CA and the nissan race shop (fontana nissan) and the nismo shop (west covina nissan)

OBO is one thing. but i highly doubt you would accept a offer 50% less than what you have listed. anything more than that is a rip off

Nissan RB26 N1 oil pump (part number 15010-24u01) asking $400 obo

http://www.nissanraceshop.com/produc...b26-1501024u01 $220

Nissan RB26 water pump (part number 21010-58s25) asking $100 obo

http://www.thenismoshop.com/Nissan-J...TT_p_1633.html 73$

Nissan RB26 timing belt (part number 13028-20p25) asking $90 obo
Nissan RB26 timing belt idler pulley (part number 13074-58s00) asking $100 obo
Nissan RB26 timing belt tensioner pulley (part number 13070-42l00) and timing belt tensioner spring (part number 13072-58s10) asking $100 obo for both

all threee of those that you have listed for $290!!!!!! (WTF)
http://www.thenismoshop.com/Nissan-F...ETT_p_397.html $130 for all three

Nissan RB26 Front main seal (part number 13510-19v00) nissan wants $9, I'll throw it in for free if you're buying other parts and ask for it!
http://www.thenismoshop.com/Nissan-F...ine_p_300.html $7

Nisaan RB26 cam/crank seal (part number 13042-16v00) nissan wants $19, no idea why but I have 5, asking $10 each or free if your buying other stuff and ask for it!

Ztune modified crank collar asking $200 obo

http://www.rawbrokerage.com/Raw6-Ext...rankcollar.htm $115

[fluffy_object]

You asked for it.........
just dont want to see anyone ripped off!

and your dealers carry that stuff, ours dont. except for a few in CA and the nissan race shop (fontana nissan) and the nismo shop (west covina nissan)

OBO is one thing. but i highly doubt you would accept a offer 50% less than what you have listed. anything more than that is a rip off

Nissan RB26 N1 oil pump (part number 15010-24u01) asking $400 obo

http://www.nissanraceshop.com/produc...b26-1501024u01 $220

Nissan RB26 water pump (part number 21010-58s25) asking $100 obo

http://www.thenismoshop.com/Nissan-J...TT_p_1633.html 73$

Nissan RB26 timing belt (part number 13028-20p25) asking $90 obo
Nissan RB26 timing belt idler pulley (part number 13074-58s00) asking $100 obo
Nissan RB26 timing belt tensioner pulley (part number 13070-42l00) and timing belt tensioner spring (part number 13072-58s10) asking $100 obo for both

all threee of those that you have listed for $290!!!!!! (WTF)
http://www.thenismoshop.com/Nissan-F...ETT_p_397.html $130 for all three

Nissan RB26 Front main seal (part number 13510-19v00) nissan wants $9, I'll throw it in for free if you're buying other parts and ask for it!
http://www.thenismoshop.com/Nissan-F...ine_p_300.html $7

Nisaan RB26 cam/crank seal (part number 13042-16v00) nissan wants $19, no idea why but I have 5, asking $10 each or free if your buying other stuff and ask for it!

Ztune modified crank collar asking $200 obo

http://www.rawbrokerage.com/Raw6-Ext...rankcollar.htm $115

Thank you for proving my earlier point that the only way you could find cheaper parts is if your local dealerships are charging less. you have just posted links to tuning shops that only sell performance parts... all of which were based in the southern United States and one being to a different brand of part (nissanraceshop, and thenismoshop in california, and rawbrokerage in florida), meaning a Canadian would have a higher cost for shipping to Canada, and a would have to pay duty. those of you familiar with ordering parts in Canada have probably heard about or personally noticed a nissan dealership is BC will usually have cheaper costs on JDM parts than one in Winnipeg or Toronto.

Next time try to compare apples to apples ... not apples to oranges, if you'd like to use those sites for reference you should try complaining about the prices on the forums at http://skylineownersusa.com/forums/

Thanks for coming out though!

regardless, I have a pending sale on everything but the N1 oil pump!

[Mitsuboost30]

so wait..

duty shipping and taxes turn 130 into 290!!!!!?

or 220 into 400!!!.... lmao

whatever you say brotha...

I would never buy from you either way.. but i dont want to see anyone overpay by double.

[fluffy_object]

so wait..

duty shipping and taxes turn 130 into 290!!!!!?

or 220 into 400!!!.... lmao

whatever you say brotha...

I would never buy from you either way.. but i dont want to see anyone overpay by double.

different countries = different prices... your comparing apples to oranges by posting links to sites in different countries... Hell why don't you find a site based in taiwan, I bet they have even better prices

[Nismo_line]

so wait..

duty shipping and taxes turn 130 into 290!!!!!?

or 220 into 400!!!.... lmao

whatever you say brotha...

I would never buy from you either way.. but i dont want to see anyone overpay by double.

not everyone has to like what others post their price as. if they feel they should get that much for something then so be it. you told him that its to much but obviously others are fine with paying little extra for a great shaped product. Nothing good to say about it then dont say anything instead of ruining a for sale ad.

[fluffy_object]

not everyone has to like what others post their price as. if they feel they should get that much for something then so be it. you told him that its to much but obviously others are fine with paying little extra for a great shaped product. Nothing good to say about it then dont say anything instead of ruining a for sale ad.

hey it happens ... do any of us really expect americans to know how to read

... the marketplace rules that is

[Terrh]

I think I paid $199 for the last N1 oil pump I bought, straight from the dealer in windsor... And $100 for my crank collar, and under $75 for my tensioners.

You asked him to post proof, so he did, and then you got upset when he did? That wasn't too smart...

If you didn't want him to post in your for sale ad, you probably shouldn't have asked him to. That's not rocket science.
Your **** never would have sold anyway because people don't like to pay double market value for stuff, so he did you a favour even if you don't see it that way. Just post a new one with reasonable pricing if you want the **** to sell, and don't waste your time if you don't want to sell it!

[Windstheory_bnr32]

water pump

the water pump isnt an n1 is it? ive been told that an r32 water pump wont fit on an r33...is this true guys or is this false?