real- TE37 17x9 +22 set of 4 w/rubber Potenza Re01

[zac3ne2nr]

UPDATE.

payment received by paypal. Guy is picking them up in a few days. Hopefully it doesn't go sideways.

real- TE37 17x9 +22 set of 4 w/rubber Potenza Re01
A very nice concave set with a low offset.

They do clear evo and sti brembos and as well as R33 and stock brakes with tonnes of room.

Size: 17x9 +22
tires: 245/45/17 Potenza RE01 - conservative 70%

I'll start here and let's see where we end up on pricing. So $2000
Color - white.
Condition - no bends or cracks.
Stickers peeling
all markings there. Rays / forged etc.

Zac
416 917 4863

[DRIVER_R32]

i like these rims, always have . should be careful with that small an offset my impul rs rims that are 17x9 are +38 , those are only +22
couldnt you use a spacer?and make it +32-+38 and clear them? im assuming you can use spacers in front of the rotor instead of behind? ive never used spacers...

[zac3ne2nr]

Your concept of offset is wrong though. The lower offset is better spaced. Think of 0 offset as the centre and the closer to 0 you get the more spaced they are. So calling an offset small is not the right word to use. My R34 GTR wheels clear these but that's based on spoke design. The TEs are not that recessed.

I don't like spacers , preference. By using a spacer you're lowering the offset not increasing it.

[DRIVER_R32]

-----------------II ) ) ) ) ) ) )
-----------------0 510152025303540
-----------------II ]
( ( ( ( ( ( ( ( (
--- -20-15-10-5,0

correct me if im wrong.

http://www.1010tires.com/Tools/Wheel-Offset-Calculator

they will fit a r32 gtr no problem! with oem brake caliper!

all skylines are +40 offset stock till 2008 gtr which is +45
rims are 16x6.5, 17x7.5, 18x8.5

I DONT LIKE SPACERS EITHER, you needed a R disk specifications (larger brake caliper clearance). so im guessing since they dont fit they are o disk smaller brake clearence.

[RixR32]

Zac is correct about the offset. Lower offset pushes the wheel out towards the fender more.
If these weren't white I'd buy them right now.

Caliper clearance has more to do with spoke design than anything else. Offset does help though, and these will fit OEM brakes.

Rick

[DRIVER_R32]

sorry i see now, for some reason i keep thinking its from the hub, when its from the centerline. duh.

http://kgm.tiwing.com/calcs/offsetcalc.htm

but the "x-factor" in this case is if you wanted big brake clearence. type -r for oem type -o , but its second hand info.

[quadracer111]

As said, spacers would make it go down closer to 0 offset wise, not up.

Same wheels I have, very nice

[zac3ne2nr]

comparison to the R34s

[PL420]

I had potenza re01, very very good tires!! Put these mags black and 18, id buy them right now!

[Blackcossie]

How big are your rotors? They look tiny. Put bigger brakes on to move the calipers out and they should clear. Are those calipers mounted to the spindle or a bracket?

[zac3ne2nr]

Rotors are 330mm hell of a lot bigger than R33/34 Brembos.

[Blackcossie]

Wow, they don't look it. My 18" TE's barely clear my 365mm set up diameter wise.

[zac3ne2nr]

Which setup is that one sir?

[Blackcossie]

Custom brembo's.

[zac3ne2nr]

Do you have a rear setup that's bigger than the R33?
The only one I could find that worked with the e brake was a lotus brembo kit but for 3k. Yikes