Tweet
hey guys, I bought all the chassis parts from a shop in Montreal for my Engineering project (where i re-designed the R32 GTR suspension) and now i need to re-sell all the stuff since i'm done with it, plus other parts i don't need anymore
I take only paypal payments to frankiman@hotmail.com
or cash in hand if local pickup
all prices are listed "+shipping" except when indicated
everything is "ready to ship" except when indicated
keep in mind also that i don't charge paypal fees before asking for a "shipped" price
aluminum 4.5mm thick front roll center corrector ball joint spacer pairs, needs to be lightly grinded inside for a tight fit ; 35$ a pair shipped
HKS SSQV BOV orignal inserts ; 10$ each
6mm inline filter for electronic boost controllers ; 20$ shipped
Nokya H3C ultra yellow bulbs with extra ultra yellow H3C bulb from PIAA ; for R32 GTS-T / Nismo headlight fog lights ; 40$
front swaybar OEM endlinks ; 25$
OEM Nissan rear side markers from an Infinity G20, with plugs ; 35$ shipped
OEM dome light, 25$ shipped
Generic Canards ; painted pearl white with double sided tape ; 60$
OEM clutch fan + fan ; for RB26 ; sold
OEM R32 GTR cluster, still works good, good to play around with too; 40$
spare timing belt for RB26 ; good condition ; 20$
tensionner pulley stud ; brand new ; 10$
R32 GTR intercooler bushing ; brand new ; 10$
OEM struts with RS'R lowering springs (set of all 4, rears are still on the car) ; front ones are completely blown, but still usable to store the car on or simply use the springs; sold
R32 GTR rack and pinion, with tie rods ; sold
custom made solid struts with bushings on upper mounts ; great to store car on, or do center-of-gravity experiments like i did ; ride height is "flush" (top of tire is just lower then highest point of the fenders) ; 80$
front outer ball joints ; great condition ; 40$ each
front lower control arms, with inner ball joints ; sold
OEM R32 GTR tension rods ; 20$ each side
front R32 GTR bare subframe ; great condition ; 100$
rear brake dust shields ; great condition ; 60$
R32 GTR front upper control arms, with plates ; sold
R32 GTR aluminum bare rear knuckes ; with bushings and tierod ends ; 100$ pair, or 65$ each
passenger side bearing/hub assembly ; good condition ; 80$
bare rear subframe ; 100$ ; the bushings look great, the traction link mounts have been reinforced with small plates
HICAS actuator ; 30$
rear tie rods ; 15$ each
OEM Rear lower control arms, with ball joints ; 70$ a pair, or 50$ each ; (the ones for sale is still on the car, no ETA when their coming off)
OEM Rear upper control arms / traction links ; 15$ each
rear sway bar endlinks with bushings ; 20$ pair
complete front knuckle/bearing/hub/J-arm assembly ; 140$ pair, or 80$ each side
OEM rear floor mats, 40$ for both
thanks for looking
I take only paypal payments to frankiman@hotmail.com
or cash in hand if local pickup
all prices are listed "+shipping" except when indicated
everything is "ready to ship" except when indicated
keep in mind also that i don't charge paypal fees before asking for a "shipped" price
aluminum 4.5mm thick front roll center corrector ball joint spacer pairs, needs to be lightly grinded inside for a tight fit ; 35$ a pair shipped
HKS SSQV BOV orignal inserts ; 10$ each
6mm inline filter for electronic boost controllers ; 20$ shipped
Nokya H3C ultra yellow bulbs with extra ultra yellow H3C bulb from PIAA ; for R32 GTS-T / Nismo headlight fog lights ; 40$
front swaybar OEM endlinks ; 25$
OEM Nissan rear side markers from an Infinity G20, with plugs ; 35$ shipped
OEM dome light, 25$ shipped
Generic Canards ; painted pearl white with double sided tape ; 60$
OEM clutch fan + fan ; for RB26 ; sold
OEM R32 GTR cluster, still works good, good to play around with too; 40$ spare timing belt for RB26 ; good condition ; 20$
tensionner pulley stud ; brand new ; 10$
R32 GTR intercooler bushing ; brand new ; 10$
OEM struts with RS'R lowering springs (set of all 4, rears are still on the car) ; front ones are completely blown, but still usable to store the car on or simply use the springs; sold
R32 GTR rack and pinion, with tie rods ; sold
custom made solid struts with bushings on upper mounts ; great to store car on, or do center-of-gravity experiments like i did ; ride height is "flush" (top of tire is just lower then highest point of the fenders) ; 80$
front outer ball joints ; great condition ; 40$ each
front lower control arms, with inner ball joints ; sold
OEM R32 GTR tension rods ; 20$ each side
front R32 GTR bare subframe ; great condition ; 100$
rear brake dust shields ; great condition ; 60$
R32 GTR front upper control arms, with plates ; sold
R32 GTR aluminum bare rear knuckes ; with bushings and tierod ends ; 100$ pair, or 65$ each
passenger side bearing/hub assembly ; good condition ; 80$
bare rear subframe ; 100$ ; the bushings look great, the traction link mounts have been reinforced with small plates
HICAS actuator ; 30$
rear tie rods ; 15$ each
OEM Rear lower control arms, with ball joints ; 70$ a pair, or 50$ each ; (the ones for sale is still on the car, no ETA when their coming off)
OEM Rear upper control arms / traction links ; 15$ each
rear sway bar endlinks with bushings ; 20$ pair
complete front knuckle/bearing/hub/J-arm assembly ; 140$ pair, or 80$ each side
OEM rear floor mats, 40$ for both
thanks for looking
Comment