Announcement

Collapse
No announcement yet.

Universal seat rails

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Universal seat rails

    I bought a set of knockoff bride cuga seats, they came with a set of universal rails but I made my bride rails work, so these rails are for sale

    100 +shipping

    I do have two of these, they will need something fabricated to mount to the floor but shouldn't be too hard

  • #2
    These aren't too hard to fabricate for, I'm currently in the process. I took a strip of steel the same length(a bit longer) as the space between the mounting holes in the floor.
    My first go I made a bracket for the inside drivers front mounting hole, so the rail was at that height, then made one for the passenger side to match it. After that we put the rails in the car and bolted the back plate to the rails. Then started fabricating brackets to mount to those.
    This has the seat at a comfortable height for me to sit in(at 6'2). However it is rather high and kind of defeats the purpose of them being low Max seats. I'm going to start again and this time have the brackets put the seats at the lowest point in the floor they can go(the inside mounting hole for the drivers side is about 3" above that so this will drop my seats nearly 3").
    If you are handy with steel and have the tools(grinders and a welder, or alternatively a drill press and bolts) you could make your own seat rails really cheap with these then paint em up.

    Comment

    Working...
    X