Tweet
Decided to change things up a bit. Up for sale is my current wheel set up on my GTR....yes you can run staggered setups on a GTR, been doing it for 2 years now.
17x9 +38 with 245/45zr front
17x10 +42 with 275/40zr rear
Tires are Sumitomo HTR-Zs with a tread wear of 200. The tires are only 3 years old and only been outside in the elements for 2 years. Even with a tread wear so low there is still 70% left f+r...gotta love AWD. There is a bit of camber wear on the front but minimal. For a GTS-T these will fit perfectly, for a GTR you might want to use the 20mm wheel spacers that I have (4 total). Only using spacers on the front right now but using them in the rear will only need a slight roll on the rear of a GTR. If you don't use the spacers on the rear you will need to grind off the little bumps on the tie rods that are there for the screw to hold on the plastic nut cap.
$750 without spacers, $850 with + shipping.
rear
front
front with 20mm spacer, rear without, fitment on rear is perfect with, just didn't want to roll.
One wheel has a minor scratch from a floor jack that went askew but other than that the wheels are perfect, had them professionally painted with epoxy 2 years ago.
In better light all cleaned up....
Jon.
17x9 +38 with 245/45zr front
17x10 +42 with 275/40zr rear
Tires are Sumitomo HTR-Zs with a tread wear of 200. The tires are only 3 years old and only been outside in the elements for 2 years. Even with a tread wear so low there is still 70% left f+r...gotta love AWD. There is a bit of camber wear on the front but minimal. For a GTS-T these will fit perfectly, for a GTR you might want to use the 20mm wheel spacers that I have (4 total). Only using spacers on the front right now but using them in the rear will only need a slight roll on the rear of a GTR. If you don't use the spacers on the rear you will need to grind off the little bumps on the tie rods that are there for the screw to hold on the plastic nut cap.
$750 without spacers, $850 with + shipping.
rear
front
front with 20mm spacer, rear without, fitment on rear is perfect with, just didn't want to roll.
One wheel has a minor scratch from a floor jack that went askew but other than that the wheels are perfect, had them professionally painted with epoxy 2 years ago.
In better light all cleaned up....
Jon.
Comment