WTB: GTR rad, clutch/pressure plate, turn signal, etc.

[judasentinel]

My car is almost complete, but it needs a few things to be completely assembled:

1. Passenger side front fender
2. Left front turn signal (must not have broken tabs/hinges
3. Locking nut for the front half shaft. I have one, and need the other
4. Wheel spacers for all four wheels, OR reasonably priced wheels (17" or 18", with at least 8.5" width all around)

I need all the above parts for a 1989 GTR.

Prefer someone local, but will pay shipment if the total price is reasonable.

Please shoot me some offers.

Thanks,

Munib

[cschepp]

I have a aftermarket clutch for 450 with pressure plate and alignment tool!

[gtr_mike]

hey man give me a call i got a few of the shaftlock nuts and washers, pulled my other car apart

[NismoS-tune]

I have a used but clean nismo single plate copper mix clutch.

[judasentinel]

TTT!!

Still need the passenger side fender, rad and spacers.

[judasentinel]

5 day bump!!

[RWDragoon]

New Koyo Aluminum rad?

[judasentinel]

No, Ryan. I dont have pockets deep enough right now to get a Koyo. I am settling for a stock rad for now, but cant seem to find one for a decent price. Dont want to spend more than $100 on it.

[NismoS-tune]

Hey Munib,

I have a stock shifter that I don't need but it has no knob on it. I'm using a solid shifter for my R33 box.

As for rad, I have a Koyo copper but I think Velders may be selling his OEM one.

Its shameful that I cannot sell my GTR shell, and so I've taken it off the market. My car is almost complete, but it needs a few things to be completely assembled:

1. Stock rad
2. Passenger side front fender
3. Stockish clutch, pressure plate (push type) for GTR
4. Left front turn signal (must not have broken tabs/hinges
5. Locking nut for the front half shaft. I have one, and need the other
6. Stock shifter
7. Wheel spacers for all four wheels, OR reasonably priced wheels (17" or 18", with at least 8.5" width all around)

I need all the above parts for a 1989 GTR.

Prefer someone local, but will pay shipment if the total price is reasonable.

Please shoot me some offers.

Thanks,

Munib

[J-O]

I have an OEM rad. works real fine.
100$
RPS clutch and pressure plate rated 550HP
used 5000km
250$
shipping from Montreal thanks

[judasentinel]

Found the clutch and rad.

I still need the passenger side front fender. Just hope someone has it. Does not matter as to what color it is, since the car is going for a paint job later in the year anyways.

Please let me know what you've got and how much to ship to Toronto (if you're not local to me).

Thanks

[judasentinel]

BUMP!!

Come on guys.....does no one have a passenger side front fender for a GTR?