various engine parts

[cortexx]

I need the following to help with my engine build :-

alternator adjustment bracket (bolts to waterpump)

C.A.S rubber gasket

The 2 bolts that hold the cam backplate onto the head + these ( part# 13526+b , 13526+a)

2 rubber hoses that connect the air chamber to the balance tube (part# 14060pc)

The 3 studs in the head on the intake side that holds on the intake manifold.

The 2 windage plates that attach to the crank girdle ( not the one in the oil pan)

Exploded diagrams of the front of the engine ( specifially the order in which the cam belt idler mechanisms assemble , and the order in which the cam belt drive sprocket and various washers go before the harmonic balancer.)

Caio

[Terrh]

You can replace the studs with bolts (I did on mine). I think they are M8 x 1.25.

http://www.nicoclub.com/FSM/Skyline/

R33 engine manual has enough diagrams to assemble everything in your engine bay.


I can't help you with the rest of the parts except the balance tube hoses, and you can just buy universal rubber hose that will work fine for that.

[bellis_GTR]

I got the 3 intake studs off my display head.

[cortexx]

I replaced the studs with the M8 bolts , used allen headed cap screws for the job ( they look very nice...)

Thanks for the manual link , i only had digitized pictures of the engine from nissan FAST and they are poorly done .

still need the other stuff ?