WTB: bolts for stock r32 seat

[Special_K]

My car didn't come with a mounted passenger seat and the driver seat is using some custom hardware.

Looking for the bolts and nuts that hold the stock r32 seats to the floor.

thx

[99_SI]

WTB: bolts for stock r32 seat

I would just measure the hole and thread pitch and get some from napa or any hardware store. M8x1.25 most likely or M6 or could also be a pitch of 1.5 or is that too coarse guys?


Sent from my iPhone using Tapatalk

[rvander1992]

They are definitely m8 and on my car the floor is threaded or there is a nut tacked on inside the floor and framers rail. No nuts involved.

[RWD_GTR]

i should have these somewhere. pm me an offer. if its ok ill go look through the thousands of nissan bolts i have

[Special_K]

I'll probably try my local bolt suppliers first before I get something shipped. M8x1.25 hopefully?

[steveo1502]

I might also have these, I have a huge bucket of bolts from 2 gtr's I parted out, neither of them had seats though, I'll have a look , try fastenal, although , I've been there twice and they didn't have what I was looking for both times