Vinyl wrap

[Matty]

Who does it in the GTA?
I remember seeing a few places from past importfest's but cant remember the names.
I am wanting to do a roof but dont have the time or patience of doing it myself.

[Matty]

If you know anyone south of the GTA (hamilton area) that does it, that is even better.

[S13Jordie]

Shinzowerks

http://www.shinzostore.com/

[Daryl @ RightDrive]

+1 for Shinzo

[doc]

Shinzo is about an hour and a half from hamilton though

[rb26addict]

i think too fast motors by york university does this wrap too ...havn't really heard any reviews about them though

[Kunzz]

+1 for shinzo, have personally seen their amazing work. those guys can definitely get all kinds of jobs done with quality

[dark_sky]

my friend does vinyl. he's in mississauga. he has done the Mill St brewery trucks, stuff at Bramalea city centre, Ontario clean water agency, stuff at Sherway gardens, New graphics for square 1, and he has done roofs and some carbon wrapped mirrors.

[doc]

post up his info
i might be interested in this as well

[dark_sky]

his shop is basically tomken and britannia. his email is mail@rdinstallations.com and his name is peter.

[trickey1991]

I can get you 3M,Avery , or Oracle Vinyl but I'm not installing and I cut you custom stickers if you need

[bWiLKINS]

Anyone know what the cost for a full car wrap is? I want to have my LS430 wrapped flat red.

[Matty]

Around $2500-3000 is what I was told by one of the guys from Importfest in 2010. There was two wrappers there. Shinzo and someone else. Quote came from one of them,.

[trickey1991]

there is guys down here doing full wraps for 1800 any colour besides like crazyy crazyy colours. lifetime warranty to, as long as the panels dont receive damage.!

Around $2500-3000 is what I was told by one of the guys from Importfest in 2010. There was two wrappers there. Shinzo and someone else. Quote came from one of them,.

[Speeddm]

Don't go cheep. You need to know that they are cutting on your car and you will get what you pay for. Im my shop it take 2 years of
work and practice before I will even test a wrapper on panel cutting. I've done over 200 wraps over the last 9 years and trained all across Canada you get what you pay for.

In GTA you want to call Brian with SpeedPro Mississauga. His installer is very good. Brian wrapped his 911 and it turned out really well.