R32 alignment in the GTA, Can-Allignment booked for 2 weeks/something basic for now.

[zac3ne2nr]

Hey guys,
I have a time with Scott from Can Alignment in 2 weeks but wondering who do you guys trust in the GTA for a basic front setup. All but coils is OE so just looking for a stock settings to store the car for the winter.
Please if you know someone available this weekend can you post here with contact information.


Regards,
Zac

[bobbo]

I used to just go to my local Nissan dealer. They've got a new alignment machine with the specs programmed in it and you don't have to be a rocket scientist to do a decent alignment.

[Voodoo_ChildR32]

I used to just go to my local Nissan dealer. They've got a new alignment machine with the specs programmed in it and you don't have to be a rocket scientist to do a decent alignment.

Aligning a Skyline isn't the same as a regular car my friend. I've done several and it's time consuming and twice the work because there are 2 steering racks. There are a lot of angles to be adjusted. Take it to someone who is competent with 4 wheel steering.


Sent from my iPhone using Tapatalk

[326_godzilla]

I can see that you are in Mississauga as well? Go to BLine Mechanics and ask for "Luis". Tell him Jonas from TAC (w/ white GT-R) sent you. He has the specs for the GT-R and basically did all of our cars (3 GT-Rs, 1 Supra).

http://b-linemechanics.com/

[Turboner]

LEVEL AUTO in scarborough, he has the oem skyline specs and state of the art machinery. I use him every time

[zac3ne2nr]

326_godzilla , Jonas thank you for the info. Luis and the guys at Bline sorted it out very well and at a very good cost.
Good information but if you guys ever need a corner balance and real track specs check Can Alignment, he builds chassis for Lemons series. 100-120 and 200 for full weigh in and all multilink.

[Redone]

Al Tech Automotive Limited
384 Olivewood Road, Etobicoke, ON M8Z 2Z9(416) 231-1611
$75
great work

[326_godzilla]

326_godzilla , Jonas thank you for the info. Luis and the guys at Bline sorted it out very well and at a very good cost.
Good information but if you guys ever need a corner balance and real track specs check Can Alignment, he builds chassis for Lemons series. 100-120 and 200 for full weigh in and all multilink.

No problem! glad it worked out. Might as well go to a guy / place that has done multiple GT-Rs