Who does Porting !?

[cobrAA]

I've been reading about porting and it doesnt seem like an easy job. I mean, porting is easy but having the thing flowtested to make sure the porting is actually good is another thing. ( no sluggish response or even elss torque at downlow revs)

So, is there any good shop in this area, I dont mind driving 10 hours if I have too.

[bobbo]

I'm sure you'll find an engine builder that has the means in your area if you do a little research. It's too common of a procedure for you to not find someone close.
In addition unless you're going to do the supporting work to make head work worth while its not worth the expense. Gasket matching, port matching ect.

[frankiman]

TK race head

[dustyGTR]

Headgamesmotorworks.com

[cobrAA]

Will check with TK. Last time I spoke to him, it seemed a bit overkill.

[Black BNR32]

LIGHTSPEED does it and I have a head from them, but I wouldn't recommend them. Too long of a delivery.

[Terrh]

Didn't see your posts, but if it's not too late I know a guy locally that has done 2 heads for me and a bunch of other import heads. He's really good. There are probably some pics of his work on my build thread. I'll send you a PM with more details.