604 help needed

[Wolfattak]

So I bought Ben's r32 shell (former fvi drift build) and have dropped in an rb20det. The issue is I have been having trouble getting it started. At first i found that I had no spark due to a missing ignition relay, which I replaced and now have spark. There was also a cut wire going to the fuel pump, which was replaced. We made sure the tank was drained completely and poured in some brand new chevron 94. so the situation right now is that we have spark, fuel pump is running, fuel lines have pressure, engine turns over, but it wont fire, and the ecu is reading 55 (ie no errors). If any of the local gurus could help me out It'd be greatly appreciated.

Evan

[dah_hunter]

PM Falcon..

if you need any other parts let me know.. i have a full parts car right now..

[Darkice]

Compression. is there compression?

[falcon]

Is it still running the stupid microtech? OR stock RB20 ECU?

[Wolfattak]

stock rb20 eccs

[jdms13rhd]

-timing?
-Fuel lines backwards?

[falcon]

Check that the CAS wires are not backwards.

Did you install a stock RB20 wiring harness with the engine? Are you SURE everything is done correctly?

I may be able to come take a look at it next week. I'm really busy though right now getting my car ready for dyno tuning on Monday.