Plz help, have some GTST/GTR fitment questions

[GTRSOAR]

Hey everyone, im needing to replace my rear right control arm and possibly (Hopefully not) the entire rear crossmember assembly in my 1991 R32 GTR. A GTST just popped up in the wreckers and it has everything I need. I grabbed the doors which fit perfectly, but what else fill fit my GTR?

Is there somewhere I can go which will let me know what parts are the same between a GTR and a GST? I have a conversion file for a WRX and STI and its exactly what I need for the Skylines. Im tired of always asking GTRC and my buddy ever time I need work done. All help is appreciated. Thx in advance!!

[cschepp]

This will not work. The gtr and gts have different front sub frames and the control arm will mount differently. You will have to find a gtr. Take a look at you gtr and then go out and take a look at the gts

[GTRSOAR]

This is for the rear subframe

[GTRSOAR]

Ive grabbed a lot of the parts off the rear part of the GTST and everything I grabbed that day was an exact match

[RIPSNZ]

GTR rear hubs and shocks are different but some of the arms are interchangable.

[GTRSOAR]

I just grabbed the sub frame a few hours ago from pick n pull, will it fit? All other smaller components did

[GTRSOAR]

By smaller parts I mean the three suspension link arms

[jdms13rhd]

gtr lower ball joints have a taper on them as well. same lower a-arm but the ball joint on a GTR wont fit in a GTS.

The subframes do fit. They just need to be modified. The 4 mounts are taller on a GTR sub frame. But then your diff wont bolt in unless you change the backing plate on the diff to a R33 2 bolt rear housing.

[cschepp]

My apologies I have read the original post inccorectly

[RhdHybrid]

Seems we both have the same problem...

[C-unit]

Only the 3 arms and hicas unit will fit. everything else are different.

- GTR has taller subframe so you will have to fab up a spacer because the GTR subframe studs will be too long for the GTS-t subframe
- Rear knuckles are different
- Rear Hubs are different
- Rear diff cover are different